Page 121 - 20_SherrillTree_Catalog_NoPrice

Visit Your Local Vermeer Dealer // 833-795-0604
119
AB
3/4" block with 8' loopie (Green) 5/8" block with 6' loopie (Orange)
C
COMBOS
C
CMI // STAINLESS STEEL BLOCKS
Stainless is used for the block axles and cheek plates whereas the bushing and sheave are aluminum. Both blocks include a separate alloy bushing supported by a stainless bolt. The bushing bolt has a large knurled head for easy opening, even with gloves.
ITEM #
18436 15162
COMBOS
SHEAVE
3 1/2" 2 3/4"
KIT19 KIT21
LINE MAX
3/4" 5/8"
WLL 10:1
3 ton 2 ton
WEIGHT
5.5 lbs 2.3 lbs
COLOR
natural natural
A
B
CMI // SMALL ARBORIST BLOCKS
CMI has come up with two smaller arborist blocks that pack almost as big of a punch as the big boys. These two blocks have aluminum sideplates with stainless steel axles. They both also feature positive locks for easy opening.
ITEM #
40408 40922
SHEAVE
3" 2 1/4"
LINE MAX
3/4" 1/2"
WLL 10:1
2.5 ton 1 ton
WEIGHT
2.95 lbs 1 lbs
COLOR
orange org/black
D
E
D
E
CMI // STEEL BLOCK (Zinc Plated)
This zinc-plated steel tailboard block is highly rust resistant and won’t chip or color-fade like similar painted steel blocks. These have stainless steel axles and a captured bushing and pin that won’t fall from the tree when replacing your sling. Cheek plates swing fully open for maximum rope access; bronze bushings between axle and bushings have very tight tolerances to keep dirt and grit out.
ITEM #
15160
SHEAVE
2 3/4"
KIT22 SET63
LINE MAX WLL 10:1 WEIGHT COLOR
3/4" 2 ton 5 lbs natural
3/4" block with 8' loopie (Green) 3/4" block with 12' Eye Sling (3/4")