Page 342 - Colony Catalog 8th Edition 2

COLONY
POWER TOOLS & ACCESSORIES
Festool Screw Clamps
Designed a key system components to the Festool MFT and Guard Rail systems. Festool Screw Clamps secure your workpiece for precision cutting, sanding, routing,
or just about any other application. Designed to work seamlessly with holes and channels on the Festool MFT Multifunction Table and can be inserted into bottom T-slot of Festool’s FS Guide Rails for limitless positioning.
Clamping thickness 4-11/16”. Includes two clamps.
Item Description 13-1201 Screw Clamps
Festool 197” Splinterguard (Replacement)
Festool FS Guide Rails are available in eight different lengths from 32” to 197” (800 - 5000 mm), providing the right length for straight, splinter-free cutting in just about any application. Replace your
splinterguard as needed to ensure perfect alignment of your guide rail to the cut line, and to protect against tear out, on cuts both with the grain and across. Clear splinterguard enhances visibility of cut line. Includes one 197in (5000mm) Clear Splinterguard.
Item Description
13-1343 197” Clear Splinterguard (one replacement)
Festool Plunge-Cut Saws
Festool TS 55 REQ Plunge Cut Track Saw
Setting the standard for portable circular saws. Lighter, easier to handle, and more accurate than traditional saws. MMC electronics ensure a consistent speed under load. FastFix blade changes- locks power switch and arbor
simultaneously for easy arbor bolt removal. Retractable spring- loaded riving knife keeps the cut kerf open so that the material does not pinch the blade, plus integrated dust extraction, and triple motor bearings. Achieve perfectly straight and splinter-free cuts when used with Festool guide rails. (Item 13-1210, 55” guide rail included).
Festool TS 75 EQF Plunge Track Saw
Capable of cutting material that is 2-3/4” thick, this saw will leave an edge that is both burn and splinter-free, creating edges that are clean enough to glue without any further prep work. The TS 75 is suitable for cutting solid doors, truing rough lumber, cutting out window frames, and a host of other
applications. Save time and create matched panels by cutting stacked sheet goods with one cut. When used with Festool guide rails (included), you can achieve perfectly straight and splinter-free cuts.
Speci cations
Power Consumption
Saw Blade Speed (RPM) Blade Diameter
High Quality Carbon Blade Bevel Cuts
Cutting Depth on Guide Rail
Cutting Depth without Guide Rail Weight
1600 watts
1,350 - 3,550
8 1/4”
36-tooth
0° - 45°
0”-3” (straight down) 2 1/8” (at 45°)
2 15/16” (straight down) 13.6 lbs.
Item Description
13-1214 TS 75 EQF Plunge Track Saw (Imperial)
Festool Cordless Track Saw TSC 55 REB-Set/XL
The TSC 55 Cordless Track Saw delivers the most versatile, precise cutting system
available, allowing you to go wherever the work takes you. The TSC 55 can zip through over 325’ of sheet goods on a single charge, while still delivering all the bene ts you’ve come to expect from the Festool Track Saw System. Includes: battery, charger and 55” guide rail.
Speci cations
Power Consumption
Saw Blade Speed (RPM) Arbor Size
Blade Diameter
High Quality Carbon Blade Bevel Cuts
Cutting Depth on Guide Rail
Cutting Depth without Guide Rail Weight
1200 watts/10 amps 2,000 - 5,200
.787”
6 1/4”
48-tooth
0° - 47°
1 15/16” (straight down) 1 7/16” (at 45°)
2 1/8” (straight down) 9.92 lbs.
Speci cations
Li-ion battery capacity Idle engine speed (RPM) Blade Diameter
Cutting depth
Cutting depth at 45°
5.2 Ah
2,650 - 3,800/5,200 6 1/4”
0” - 2-1/8”
1-11/16”
Item Description
13-1213 TS 55 REQ Plunge Cut Track Saw (Imperial)
Item Description
13-1484 Cordless Track Saw TSC 55 REB-Set/XL
Festool Splinterguard
Use the off-cut side splinterguard in conjunction with the integrated guide rail splinterguard. Includes 5 Splinterguards and 1 replacement thumbscrew.
Item Description
13-1401 Splinterguard (5 pieces)
342
TO ORDER CALL 800-698-0781 OR VISIT COLONYHARDWARE.COM