Page 44 - Colony Catalog 8th Edition 2

3M P100 Particulate Filter
When properly tted, use in a variety of applications including welding, brazing, torch cutting, metal pouring, soldering, and
exposure to lead, asbestos, cadmium, arsenic, and MDA for concentrations up to 10 times
the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively t tested to claim assigned protection factor above
10 in negative pressure mode. Do not use in environments that are Immediately Dangerous to Life or Health (IDLH).
Unique, spring-loaded lter cover design simpli es negative pressure user seal checks. Swept-back design provides enhanced eld of view and greater comfort. 12 units per box.
Item Description
14-0292 3M P100 Particulate Filter
3M Pre-Filters
Designed to be
used as a pre- lter in conjunction with 6000 Series cartridges. Must use with 501 Pre-Filter Retainer. Pre-Filters sold
in packages of 10. Retainers sold individually.
3MTM Particulate Filter
NIOSH approved for environments containing certain oil and non-oil based particles. Use with 3MTM Respirators 5000 Series
or 3MTM Cartridges 6000 Series with 3MTM Adapter
502, 3MTM Facepieces 6000 Series, or 3MTM Facepieces 7000 Series with bayonet lter holders. When properly tted, use in a variety of applications for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively t tested to claim assigned protection factor above
10 in negative pressure mode. Do not use in environments that are immediately dangerous to life or health (IDLH).
Item Description 14-2052 Model 7093B
3MTM Hydrogen Fluoride Cartridge/ Filter with Nuisance Level Organic Vapor and Acid Gas Relief
This cartridge/ lter is NIOSH approved and provides the highest level of protection against oil
and non-oil based particles. Use with 3MTM Half and Full Facepieces 6000, 7000 and FF- 400 Series with bayonet lter holders. When properly tted, use in a variety of applications including welding, brazing torch cutting, metal pouring, soldering and exposure to lead, asbestos, cadmium, arsenic, MDA and HF for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces.
Item Description 14-2053 Model 7093C
Respirator and Equipment Cleaning Wipes
These pre-moistened wipes are alcohol free, individually packaged tissues that are used to clean respirator masks, and other safety equipment such as face shields, hard hats, and
hearing protectors. The dispenser holds 100 individually packaged, large 5” x 8” folded wipes.
Item Description 14-0047 Cleaning Wipes
Fit Testing
PERSONAL PROTECTIVE EQUIPMENT
COLONY
Item Model
Description
P100 Multi-Gas & Vapor Cartridge
NIOSH approval: P100/certain organic vapors, chlorine, hydrogen chloride, chlorine dioxide,
3MTM Fit Test Kit
FT-10 Qualitative Fit Test Apparatus. Includes FT-11 Sensitivity Solution (sweet), FT-12 Test Solution (sweet), FT-14 Fit Test Hood, FT-15 Collar, FT13 Nebulizer (2 pack).
Item Description 13-9074 3M Fit Test Kit
Fall Protection - Anchoring
Beamer 2000 Anchor
Follows effortlessly above or behind workers. Fits structural steel beams 3 1/2” to 14” wide; up to 1 1/4” thick. Can be used on top or bottom beam anges. Lever-locking end piece makes size adjustment simple. Lightweight and easy to carry (3 1/2 lbs.).
Item 14-0337
Fixed Beam Anchors
Installs in seconds to the beam structure providing a 5,000 lb. rated anchor point for hori- zontal and vertical applications. Anchor is easily installed by sliding the adjustable hook-end down to the ange and securing a pin. Easily adjust to exactly where you want it.
13-9061 5N11 14-0295 5P71 13-9063 501
Pre-Filter N95 Pre-Filter P95 Pre-Filter retainer
sulfur dioxide, hydrogen sul de (escape only), ammonia/methylamine, formaldehyde, or hydrogen uoride. Please note that OSHA regulations require that gas-proof goggles
be worn with half facepiece respirators when used against formaldehyde. Sold in packages of 2. Model 60926.
Item Description
14-0923 P100 Gas & Vapor Cartridge
Item
Beam Size - Flange Width
Beam Size - Flange Thickness
TO ORDER CALL 800-698-0781 OR VISIT COLONYHARDWARE.COM
14-0693 2 1/2” - 12” 1 1/2” 14-0332 2 1/2” - 18” 2 1/2”
43