Page 441 - Colony Catalog 8th Edition 2

COLONY
FASTENERS & FASTENING SYSTEMS
PollyTM Setting Tool
Poly-ToggleTM Plastic Hollow Wall Anchor
Base Material: Wallboard or solid masonry
Size Range: 1/8" to 1" wall thickness Anchor Material: Plastic
The Poly-Toggle is a screw actuated hollow wall anchor for use in paneling, wallboard and solid masonry available in 4 sizes to match the most common wall thicknesses. In solid base materials, the anchor can be used by removing the outer wings. The anchor is recommended for light duty static application where holding power is not a critical factor.
Pop-ToggleTM
Base Material: Gypsum Wallboard, Plaster, some Hollow Masonry
Size Range: Wall thickness from 1/8" to 3/4", No. 6 to No. 14 wood or sheet metal screws
Anchor Material: Plastic
Pop-Toggle fasteners are hollow wall anchors ideal
for static applications requiring light to medium load performance. Installation is very fast, needing a pre-drilled 5/16" diameter hole. The fastener pre-installs without a screw, allowing for easy placement and removal of the xture. Pop-Toggle fasteners are not recommended for use overhead or applications where holding values are critical.
Snap-ToggleTM Heavy-Duty Anchor
SNAPTOGGLETM heavy-duty hollow-wall anchors carry twice the load in a small hole than
standard anchors. New patented strap design with sturdier straps and smaller ratchet interval adjusts more precisely and snaps off ush to the surface. SNAPTOGGLE Toggle Bolts can be used in all hollow materials, including:
Drywall • Gypsum Board • Plasterboard • Plaster • Concrete Block Cinder Block • Aerated Concrete • Stucco • Composite Panels Acoustic Ceilings • Fiberglass • Cement Board • Green Board
Zip-It® Anchors
Zip-It®
Base Material: Wallboard
Size Range: Use with No. 6 or No. 8 screw Anchor Material: Engineered Nylon or Zamac Alloy
The Zip-It anchor is a one-piece self drilling anchor designed for use
in hollow gypsum wallboard for light duty loads. It is available in both engineered nylon and Zamac alloy for use with either a No. 6 or No. 8 screws in 3/8" to 1" wallboard. The Zip-It Jr. is formed from engineered nylon for use with No. 6 screws in 3/8" to 5/8" wallboard.
Item
Type
99-2150
PollyTM Setting Tool
Item
Size
Drill Dia.
Wall Thickness
Std. Box
Thread Size
99-4052
3/16" x 4"
1/2"
2 1/2"
50
10 - 24
99-4054
1/4" x 4"
1/2"
2 1/2"
50
1/4 - 20
99-4056
3/8" x 4"
3/4"
2 1/2"
25
3/8 - 16
99-4058
1/2" x 4"
3/4"
2 1/2"
25
1/2 - 13
Item
Size
Wall Thickness
Drill Dia.
Std. Box
99-2302
Mini
1/8"
5/16"
100
99-2303
Short
3/8"
5/16"
100
99-2304
Medium
1/2"
5/16"
100
99-2305
Long
5/8"
5/16"
100
Item
Wall Thickness
Description
Std. Box
Type
99-2345
3/8" to 1"
Std. box, no screws
100
Nylon Zip-It®
99-2348
3/8" to 1"
Std. box, No.8 x 1"screws
100
Nylon Zip-It©
99-2346
3/8" to 1"
Std. box, no screws
100
Zinc Zip-It®
99-2349
3/8" to 1"
Std. box, No.8 x 1"screws
100
Zinc Zip-It®
99-2350
3/8" to 5/8"
Std. box, no screws
100
Zip-It® Jr.
99-2351
3/8" to 5/8"
Std. Box No.6 x 1"screws
100
Zip-It® Jr.
Zip-It® and Zip-It® Jr. Kits
Item
Material
Description
99-2368
Nylon
Zip-It Kit- 50 Anchors No.8x1"screws, & No.2 Power Bit
99-2369
Zinc
Zip-It Kit- 50 Anchors No.8x1"screws, & No.2 Power Bit
99-2367
Nylon
Zip-It Jr. Kit- 50 Anchors, No.6x1"screws, & No.2 Power Bit
Item
Description
Std. Box
99-4060
Pop-Toggle Small
100
99-4062
Pop-Toggle Medium
100
99-4064
Pop-Toggle Large
100
442
TO ORDER CALL 800-698-0781 OR VISIT COLONYHARDWARE.COM