Page 511 - Colony Catalog 8th Edition 2

COLONY
STRUT & HANGERS
Caddy® Pyramid 50 Pipe Support
Designed as a support for pipes and conduit
on rooftops or any at surfaces. Eliminates the
need to eld fabricate rooftop pipe supports.
Made of a tough, UV rated, closed cell
Ethafoam® polyethylene foam with a 14 gauge
steel top that accepts standard strut ttings.
Large footprints of foam bases distribute loads over wider area. Accommodates expansion and contraction of piping. Won’t damage roof membranes. Tested for outdoor use. Size: 10 3/8” x 4”W x 4”H.
H-Block Rooftop Support
Perfect for supporting natural gas and
refrigeration piping systems, cable tray,
electrical conduit, multiple lines, HVAC
equipment and many other applications.
Standard strut mount pipe clamps are
used to secure the pipes. Suitable for
installation on most types of roo ng material or other at surfaces. Base material is 100% recycled rubber. 4-1/2” H x 5” W. Load capacity: 2,500 lbs.* 13/26” H-164 Channel.
Item Strut Length Base Length 21-0196 9.312” 10-7/8”
* Load is only for the capacity of the components in this assembly. Please consult roo ng manufacturer or engineer for roof load capacity
StrutcatcherTM
StrutcatcherTM is designed to be
used in conjunction with HangerLok.
The Strutcatcher turns into strut
at any position and allows parallel,
perpendicular, and 45o positioning. Allows for prefabrication of trapeze hinges, reducing labor units by 35% or more. Fits the following sizes of strut: 1 5/8” x 1 5/8” (12 gauge), 1” x 1 5/8” (12 gauge), 1 3/16” x 1 5/8” (12 gauge), 1 5/8” x 1 5/8” (14 gauge).
Item
21-0195
HangerLok®
Qty. per box
10
HangerLok is a unique pipe hanger system that works with all types of pipe and tube. Works simply and easily... just insert the pipe/tube into the open HangerLok, apply slight pressure to the tubular member, and the jaws close and lock. Can
Max. Load
50 lbs.
be attached to wood, concrete, brick, cinder block, sheet metal, berglass and strut. Available in
Polypropylene for indoor applications or Nylon 12 for indoor or exterior applications. Refer to the chart below for ordering the correct size HangerLok for your application.
Item Model 92-1020 LT109
HOW TO INSTALL STRUTCATCHERTM
1. Insert Strutcatcher into strut.
2. Twist Strutcatcher 90° and it locks in place.
3. Mount Clic onto Strutcatch- er with a screw. Swivel Clic to desired position.
Screw for HangerLok®
Qty. per box
100
HOW TO INSTALL HangerLok®
1. Mount HangerLok to surface.
2. Insert cable or conduit into the open HangerLok.
3. Apply slight pressure to the tubular member and the jaws close and lock.
Size
Rigid & IMC, EMT
Schedule 40 & 80 PVC 40 & 80
Copper & Plastic & Metal
1/4” — — #12 3/8” — — #17
1/2” #17 5/8” — 3/4” #22
#20 #20 — — #25 #25
1” #28 #32 #32 1 1/4” #36 #40 #40 1 1/2” #40 #47 #47
2” #51 #59 #59 2 1/2” #71 #71 #71
3” #80 #80 #80 3 1/2” #101 #101 #101
4” #113 #113 #113
Required for HangerLok Strutcatcher sizes 63LT-113LT.
Item 92-1027
514
TO ORDER CALL 800-698-0781 OR VISIT COLONYHARDWARE.COM