Page 518 - Colony Catalog 8th Edition 2

Beam Clamps
Electrical Beam Clamp
Electrical beam clamp. Electro Galvanized nish.
Caddy Hammer On Flange Clip
Clamp on design permits fast and easy
installation on bulb tees and bar joists
regardless of insulation materials used.
Fits most bulb tees (3/32” to 9/64”
ange thickness) and beam anges 1/8”
thru 3/4” thick. 1/4” diameter hole in tab. Easy installation... only a hammer required.
Rod Item Size
Electrician’s Beam Clamp
Jaw Opening
Design Load (lbs.)
21-0582 1/4”-20 15/16” 450
21-0583 3/8”-16 1” 1300
21-0581 1/2”-13 1” 1300
Malleable, electro-galvanized 1/4” beam clamp. Unique, 3-hole design allows clamp to be hung in the standard position, or face down. A third “thru- hole” allows for unlimited height adjustment. 15/16” jaw opening.
Item Description
21-0480 Electrician’s Beam Clamp
Minerallac Universal Beam Clamp
Case hardened steel set screw tapped at an angle locks onto beam. Steel clamp is zinc plated after fabrication.
Mounts 4” square boxes with conduit. Has plain center hole for screw or threaded rod mounting. Suspend from drop wire, rod, or structural beam. One riveted assembly.
Caddy Beam Clamp for Conduit Support
Fits beam anges up to 1/2” thick. Supports 1/4” and 3/8” threaded rod, S-Hooks, electrical boxes, conduit and standard bridle rings (1/4”-20 or #10-24 thread- ed). Easy to install. Static load limit: 100 lbs.
Item Model
Qty. per box
Snaps easily onto a tee
bar, allowing the xture
or box to be positioned
anywhere across a 24” span. Dual height feature permits 1 1/2” deep electrical box to be mounted ush with tile or offset 3/4” for a plaster ring. Comes complete with box mounting clip and 1/4”-20 screw. Other sizes available for acoustical tees with spans up to 30” in length.
Item Model Description Qty. per box 21-0710 512 Box Hanger for 24” Span 50
STRUT & HANGERS
Item Model
Box/Conduit Hangers
Flange Thickness
Qty. per box
21-0259 2H4 21-0261 4H24 21-0262 4H58 21-2008 4H912
3/32”-9/64” 100 1/8”-1/4” 100 5/16”-1/2” 100 9/16”-3/4” 100
Item Model 21-0724 812MB18A
Description
1/2” & 3/4” conduit
Qty. per box
25
COLONY
Item Model
Rod Fits Flange Size Size
Qty. per box
This Caddy Flange Clip is designed to allow an
electrical box to be hung from the underside or to
the front of a beam ange. Requires only a hammer
to install. Provided with a 1/4”-20 thread impression
so the box may be quickly and securely attached to the clamp. Other sizes available for anges from 1/8” to 3/4” thick.
Caddy Hammer On Flange Clip - Universal
21-0232 600 1/4” 1/2” 50 21-0233 602-B 3/8” 3/4” 25
Item Model
Caddy Snap On Fixture/Box Hanger
Flange Thickness
Qty. per box
21-0264 M24 21-0265 M58 21-0267 M58S
1/8”-1/4” 100 5/16”-1/2” 100 5/16”-1/2” 100
21-0236 BC
Other sizes and styles available.
100
TO ORDER CALL 800-698-0781 OR VISIT COLONYHARDWARE.COM
521