Page 766 - Colony Catalog 8th Edition 2

Air Tool Hose
Lightweight Air Hose
New lightweight and exible low temperature urethane air hose features oil resistance, cut resistance, and extra long life compared to conventional rubber or PVC. Ideal for contractors using pneumatic nailers and staplers on the jobsite. Flexible to - 40° F. Working pressure: 300 lbs.
Safety Whip-Check Cables
These strong steel cables prevent hose whip in case of accidental separation of coupling or clamp device, preventing accidents and injury. Whip-Check reaches across the hose ttings to provide stand-by safety for hose. Spring loaded loops in the cable ends open easily to pass over the couplings for a rm grip on the hose. Highly resistant to rust and corrosion. Whip-Check cables should be installed in the extended position with no slack. Working pressure: 200 PSI. Two styles available.
COLONY
CONTRACTOR’S HOSE & ACCESSORIES
Jackhammer Hose
Quality hose designed for use with mobile air compressors. Assembly includes
Item
Hose I.D.
Length
Description
10-0212
1/4"
25'
Coupled with 1/4" male NPT brass ttings on each end
10-0213
1/4"
50'
Coupled with 1/4" male NPT brass ttings on each end
10-0214
3/8"
25'
Coupled with 1/4" male NPT brass ttings on each end
10-0215
3/8"
50'
Coupled with 1/4" male NPT brass ttings on each end
10-0216
3/8"
25'
Coupled with 3/8" male NPT brass ttings on each end
10-0217
3/8"
50'
Coupled with 3/8" male NPT brass ttings on each end
universal couplings attached with Band-It clamps at each end. 3/4" I.D. Working temperature range: - 40°F to 180°F. Sold in 50’ lengths.
Hose Whip Assembly
Short hose assembly with a 1/2" I.D. used as a exible connector between supply hose and tool. Used to protect couplings
from breakage due to the constant vibration created by hammers, rivet busters and paving breakers. One end of the whip hose connects to the tool, while the other end connects to the air supply with the quick acting coupling. Whip hoses should remain permanently connected to the tool and should be the same diameter as the supply line hose. Assembly includes a universal on one end, and a Bent Stem Swivel on the other. Working Pressure: 300 PSI.
Industrial Air Hose
Industrial air/water hose assembly includes brass NPT male ttings attached with crimped ferrules
on both ends. Red EPDM cover provides excellent resistance to abrasion, weather, tearing and ozones. High tensile synthetic braiding process for extended life even at maximum working pressure. Working pressure: 250 lbs.
Flexeel® Reinforced Lightweight Air Hose
Extremely lightweight and tough, retains
its exibility even in cold environments.
The reinforced construction eliminates
the possibility of having the various layers separate due to constant expansion and contraction during pulsating operations. Perfect for use with nail or staple guns. Temperature range: -40° F to 165° F. Working pressure: 200 PSI. Coupled with 1/4” NPT
Air Tool Fittings & Accessories
Universal Hose Couplers
All of our universal hose couplers are made of malleable iron. Also available in brass and stainless steel. Gaskets are included. Other sizes are available in addition to what is listed below.
Universal Hose End Coupler
Item
Working Pressure
Color
30-0180
250 lbs.
Red
30-0184
300 lbs.
Red
13-0471
Hose to Tool
Hose 13-0474 to
Hose
Item
Hose I.D.
Length
Description
13-0474
1/2"-1 1/4"
20 1/4"
Hose-to-Hose Service
13-0473
1 1/2"-3"
38"
Hose-to-Hose Service
13-0471
1/2"-1 1/4"
20 1/4"
Hose-to-Tool Service
13-0472
1 1/2"-3"
38"
Hose-to-Tool Service
Item
Size
Bent Stem Swivel Size
30-0188
1/2"- 6'
7/8"-24
30-0190
1/2"- 6'
1/2" NPT
Item
Hose Fitting
Size
Length
13-0380
1/4" NPT
1/4"
25'
13-0381
1/4" NPT
1/4"
50'
13-0384
3/8" NPT
3/8"
25'
13-0385
3/8" NPT
3/8"
50'
Item
Hose Size
13-0490
1/2"
13-0491
3/4"
Item
Hose I.D.
Length
10-0198
1/4"
50'
10-0199
1/4"
100'
770
TO ORDER CALL 800-698-0781 OR VISIT COLONYHARDWARE.COM