Page 10 - Cyclone Product Catalogue_2022_FINAL.indd

GATES – 5 BAR AND ENTRY

Description Specifi cations

5 Bar gate 5 Bar gate – Galvanised

The Cyclone 5 bar gate is a versatile gate, commonly used with • Produced entirely from 25mm NB, 150g/m zinc coating, hot dipped galvanised pipe, with
2
cattle and in applications where higher stock pressure exists. 25mm NB cross bars and with a nominal wall thickness of 2mm.
• Welded collar attached at hinge end to increase compatibility with a broader range of gate
Entry gate
hardware, including brooker hinges.
Cyclone Entry gates are a smaller version of our rural gate range • Full notch weld construction.
and are commonly used for hobby farms, domestic applications,
yarding solutions and pedestrian access.

Range

Material # Item description 1170mm
5 Bar gate – Galvanised
220473 1170 x 2370mm (8')
220478 1170 x 2970mm (10')
220484 1170 x 3570mm (12')
220490 1170 x 4170mm (14')
306810 1170 x 4770mm (16') Entry gate – Galvanised
Entry gate – Galvanised • Produced from 20mm NB heavy galvanised pipe both inside and out,

306551 1170 x 830mm (3’) providing corrosion resistance.

306552 1170 x 1025mm (3.4’) • 100mm x 50mm x 4.0mm mesh infill.

306553 1170 x 1200mm (4’) • Welded collar included for universal gate hardware fitment.

308129 1170 x 1500mm (5’) • A set of gate fittings included with every gate.
307727 1170 x 1800mm (6’)
t
e width 8’ = ga
1170mm = gate height 2370mm = gate width 8’ = gate opening
e opening
t
e heigh
0mm = ga
117
0mm = ga
t
7
t 23
1170mm

WELDED MESH ACTUAL SIZE GATE OPENING

NATIONAL PRODUCT CATALOGUE | EFFECTIVE MARCH 2022 10 www.cycloneproducts.com.au | t: 1800 199 450 | sales@cycloneproducts.com.au