Page 71 - Critical Control flipbook_Neat

Mobile Equipment

Incident

1 What is the name of the 2 What are its specific objectives related to the Priority Unwanted
critical control for Mobile
Event (PUE)?
Equipment Incident?
Zone Access Control Vehicles entering heavy mobile equipment areas communicate and only enter when
cleared by heavy mobile operators

3 What are the critical 4 What are the activities 5 What can be sampled from
control performance
within the management
the set of activities for
requirements to meet the systems that support verification, providing a
objectives? having the critical control clear image of the critical
able to do what is required? control status?
Two way positive communication Set up a process for two way positive Review process and verify it’s followed
ensuring messages are understood communication and ensure workers are on site
between sender and receiver (light ME trained to use this process
and heavy ME)

Hold points are set up for light ME to not Assess hazards of light ME needs to Review identified hold points and verify
pass before obtaining permission from access areas with heavy ME movement the right place and information given
the appropriate heavy ME and set up hold points at entry routes on site

Mobile equipment is fitted with two-way Identify mobile equipment needs for Review identified radio channels and test
communication devices using the same communication devices and install the message going through those channels
channels necessary
Define channels to be used on site

6 What is the target performance for critical 7 What is the critical control performance
trigger for shutdown, critical control review or
control?
investigation?

100% of identified mobile equipment are equipped with Vehicle entering the working zone of heavy mobile equipment
communication devices and their operators are trained and without permission of heavy mobile equipment.
follow two-way positive communication protocols

Creation date: 01/2021 • The latest and only controlled version of this document is available on the HSE intranet.
© 2021 Holcim - For internal use only