Page 2 - Cooling-Bladeshelter
P. 2
General Characteristics
Tecnocooling is a modular
refrigeration unit, scalable and Electronic board
energy effcient. A dedicated electronic board is
able to communicate with the
motorcondensing unit and allows
Tecnocooling summarizes the two the control of the fans.
fundamental parameters: low power It is also possible to run a series of
consumption and possibility of alarms set by the user (maximum
use even in presence of extremely temperature and humidity
high loads. The system can in fact limit, opening of the doors, smoke
presence). A WEB interface
dissipate from 4 up to 35 kW. allows remote control of the
parameters through a MODBUS
The high cooling capacity is protocol and can send alerts via
guaranted by the use of a water e-mail and trap through a
chiller or a gas direct expansion SNMP standard protocol.
A control panel on the door of
system (DX) coupled to a Class A Tecnocooling allows manual
motorcondensing unit. setting of the environmental
parameters.
Cooling confgurations
Gas Cooling
An outdoor motorcondensing
unit pushes the refrigerant gas in
the cooling circuit which remains
insulated. Air is drawn and forced
through the battery plate and
then forced against the machines
contained in the rack.
Cooling Systems
• Motorcondensing unit
• Water chiller
Water Cooling
The water circulates in a circuit
that is part of a cooling batteries
system. The air is sucked from
the Tecnocooling fan system
and forced to cross the batteries
faps.
The cold air is blown into the
equipments contained in the
rack and cools them.
