Page 2 - Micro Transfer Switch TreRoda

Maximum protection of IT devices from overload, failure and damage

One of the safety features of the Zonit μATS™ is a patent-pending virtual circuit breaker that immediately
triggers an audio alarm if the maximum current of 8A is exceeded. If the excess current continues, the Zonit
transfer switch caps the power supply to protect the IT component and a red LED lights up to indicate the off
status. It can be manually restarted with the restart button on the transfer switch chassis. Another circuit
breaker inside the device is only triggered if, for example, the connected IT device short circuits. This means
that the connected IT hardware has maximum protection from malfunctions, failure or even damage caused
by power loss at all times.

Available to retrofit a redundant power supply for
1, 2 or 3 IT devices with a single transfer switch

There are different versions of the Zonit Micro Automatic Transfer switch available. The standard single-port
version has a C13 connector integrated at the switch. The 1-port "Y" model has a 22cm long cable at the C13
connector. 2-port and 3-port "Hydra" versions are also available. Both are particularly suited for use in highly
dense environments.
All versions handle voltages between 208 and 240 volts at up to 8 amperes.

 Ultra-compact transfer switch with 1. Redundancy
1, 2 or 3 ports
Enables redundant power feeds for single power
 Zero U device cord devices
 Single-power devices are supplied with 2. Select Maximum Reliability vs Cost-Effectiveness
Can be employed in ratios of 1-to-1 vs 3-to-1 to
redundant power maximize reliability vs cost.
 8 A version for 208 to 240 volts Ideal for applications where there is a
 Only 9 to 11 ms to switch from primary "sprinkling" of single-corded devices located
throughout the DataCenter
to secondary power supply 3. 99.9% Efficient Power Distribution
 Switch from A to B circuit regardless
Saves 3-15% of annual DataCenter power costs
of phase angle 4. Increase UPS Efficiency by 3-5%
 Virtual circuit breaker with audio alarm
 Power supply automatically capped in Saves 3-5% of UPS power conversion losses
5. Cost Effective N+1 Reliability
the event of excess current
 “Hot walk” feature for simple relocation Eliminates the need for 2nd power supplies in
N+1 horizontal server tier
with interrupting the power supply 6. Re-Location Flexibility

Allows easy “hot moves” to relocate powered-
up equipment within the rack or between racks.
Ideal for doing deployments that are temporary
or will be moved at a later date

2