Page 48 - Australasian Paint & Panel Nov-Dec 2018

PRODUCTS
GYS SPEEDLINER COMBI 230 E PRO
The GYS Speedliner Combi 230 E Pro is a complete dent pulling kit, essential for repairing small, medium and big dents (sill, wheelhouse, car fender). The Speedliner allows you to remove dents without disassembling, and repair the vehicle without replacing.
In addition, the Speedliner has three guns (steel automatic, steel manual and aluminium automatic) and 240 Volt of input
that generates an output of 7500amps of current.
Kit includes GYS Speedliner Combi 230 E Pro, trolley spot 1600, 6 gripping multi hook, 4 gripping multi hook head, inertia hammer for glue puller, manuspot pulling kit steel dent puller,
levelling lever without hook, levelling bar 85cm, 3 lifting rods 150/300/500mm, mini puller, alu clamp 1, alu clamp 2, consumables box for steel dent pulling, cable hanger, set of 2x 55mm extension joint for dent
removal bar, earth magnet, clipsal 1p 3pin 15a hd plug.
More information: shop.sape.com.au/ products/GYSEPRO
THE FINIXA CURE
A trio of Finixa UV products have been developed with the purpose of increasing productivity and profitability in your workshop. The UV Primer and Primer Cleaner aerosols along with the Spectratek UV LED Curing system are the future of the industry.
Finixa TSP150 UV Primer is a one- component UV curable primer-filler with a 2-minute cure time and no mixing required. It is the perfect aerosol primer for spot and SMART repairs and will increase productivity from the first time you use it. Finixa UV Primer aerosol is for use on properly cleaned and sanded steel, aluminium, galvanised steel, cured and sanded OEM finishes, polyester body fillers, rigid and semi-rigid plastics.
TSP1200 UV Primer Cleaner is the second step of the new UV aerosol range and is especially formulated for use with Finixa UV Primer. It is to be used after curing and before the sanding stage. This product will
help to increase the life span of the abrasive materials used in the sanding stage and can also be used to remove non-cured UV Primer.
.Some of the main benefits of the Spectratek UV-LED curing system compared to traditional mercury lamp based devices are: safe, pure UVA radiation, up to 70% less energy consumption, no heat-up or cooldown time, passive cooling by using a massive aluminium heatsink, long LED lifetime up to 20,000 hours.
Ultraviolet (UV) curing is one of the fastest and most efficient methods in the paint and coating industry today. UV cure coating is increasingly being used to create coatings with improved physical and chemical properties, cut overall costs of coating processes as well as reducing the environmental impact that curing creates.
More information on: (02) 8036 8210 or visit bodylineimports.com.au
U-POL RAPID GLAZE
U-POL has utilised its 70-year heritage of pioneering products
for the accident repair industry and developed an advanced
lightweight fine filler formulation. Rapid Glaze is specially formulated to finish off very fine repairs and correct small imperfections in
a fraction of time compared to most conventional formulas.
This game-changing new product was launched in April and has already proven to be a
sales success.
Rapid Glaze uses advanced lightweight resin
technology to enable full cure and easy sanding in just six minutes. Presented in a convenient 880ml bag ensures no waste.
Extensive tests carried out over the last 12 months reveal that all Rapid System product can increase productivity by up to 40 per cent, dramatically reducing costs and lowering key-to-key cycle times. Crucially, all Rapid System product provide bodyshops with the complete flexibility of air-drying, oven baking or using gas fired/infrared drying systems for curing.
Ask your local U-POL representative for a Rapid Glaze demonstration or visit: u-pol.com
48 PAINT&PANEL November / December 2018 www.paintandpanel.com.au