Page 59 - Climate Control News November 2018
P. 59

CO Smart Sensor
designed and manufactured by Regulator Automation
NOW AVAILABLE
CO3800 – CO Smart Sensor
- Designed and Manufactured by Regulator Automation in Sydney.
- Slim and attractive wall mounted sensor casing design.
- Unique feature: has a tiny fan that draws air in from the bottom of the housing through a dust filter over the sensor and discharges through the top. This ensures a positive response to carbon monoxide emissions while the sensor is well protected inside the polycarbonate housing.
- Power and communications are supplied over one pair of wires.
- Connects to Regulator’s TC5044 controller
- Up to 10 CO3800 sensors can be fitted to the
TC5044 controller
- There is a 4 position DIP switch on each sensor. If the DIP switches are set for each sensor then the CO level for each area can be read at the controller. The controller will recognise how many sensors are connected and will select the highest CO level to control the carpark ventilation fan(s). If the DIP switches are not set, then the controller will allocate an address to each sensor, however the CO Levels for each area will not be available, only the highest CO level detected.
- Each CO3800 Carbon Monoxide sensor is calibrated as a group in a custom calibration chamber complete with a calibration label.
Air Conditioning Controls & Instrumentation
8 Hope St, Ermington, NSW 2115
(02) 9804 6366
info@regulatoraustralia.com.au
regulatoraustralia.com.au
318A-REG188452
NEW & INNOVATIVE


































































































   56   57   58   59   60