Page 72 - Australasian Paint & Panel July-August 2019
P. 72

New Products
72
PAINT&PANEL JULY / AUGUST 2019
NEW PRODUCTS
-
CELETTE CAMELEON PREMIUM
The Cameleon Premium is the complete solution to check and fix all the points on a vehicle. Cameleon Premium provides angled jigs, so you can repair all damage on a vehicle, including those which impact shock absorbers.
Complete your Cameleon Entry with all the angle jigs required to fit the OEMs repair procedure specifications. As with the Cameleon Entry, Cameleon Premium can be adjusted on X, Y and Z, and gives 2 additional settings to set angles.
Comes with 16 blocks, extra sockets, additional standard plates and more adapters for horizontal & multi angle fixtures. The set also consists of two universal holding devices which facilitate extra anchoring and holding position to the vertical points.
Visit: sape.com.au
BASLAC ONLINE TRAINING
Baslac has launched a technical online support tool to assist customers to follow standard operating procedures for all baslac processes. The online support tool includes simple, step-by- step process instructions and videos, and is available to paint shop technicians 24 hours a day, 7 days a week.
“The baslac online
support tool was
launched to provide bod-
yshops with access to
knowledge and process-
es without any delay,”
said Damien Badenoch, baslac technical services coordinator. “Tech- nicians may have doubts on a certain process, but having the online tool available can alleviate any concerns, allowing them to identify the correct practice and get on with their work.”
The online technical support tool is now available for solvent (baslac 35) and waterborne (baslac 45) product lines on the ba- slac website. To obtain access, speak to your approved local ba- slac distributor.
FINIXA POLISH
Finixa continuously improves its products in the detailing and car care space. Finixa POL10 one step polish paste is the top detailing solution offered by Finixa but not the only solution. New to the range comes the Finixa 2-step system, consisting of POL15 cutting polish and POL16 finishing polish.
Finixa POL10 one step polish paste can be used for different applica
tions: removing dust, polishing spray zones, polishing contamination after
sanding, bringing back gloss on old, matte paints and refurbishing headlights.
Based on nanotechnology, this paste can polish not only very fast from coarse
to very fine, but it also brings back a gloss degree of 95%. An additional advantage
is that it stays ‘wet’ for a long time and minimises the risk for dry powder residue as
it’s a water-based compound. This polish paste can also be used on old paints and fresh paints, as well as all 2K products and the newest generation of ceramic paints.
For those who prefer to work with a two-step system, Finixa has newly released their own POL15 & POL16
2 step cut and polish system, both water-based products, safe to be used on fresh paint. The POL16 finish-
ing polish is a great product for removing holograms and micro-scratches after cutting with POL15. This is a budget friendly system that will get you excellent results while being easy to clean up afterwards. Another new product to the Finixa range that pairs perfectly with both the single and 2-step pol- ish systems is the POL80 heavy-Duty Electric polisher. This polisher is a 1500W unit with a 2:1 transmission providing high-torque at low RPM. Adjustable from 700 up to 2500 RPM with a reliable cooling-ventilation system. Weighing in at 3.7Kg it is heavier than its POL55 1050W counterpart
however is still easy to use and provides comfortable handling.
More information on: (02) 8036 8210 or visit: bodylineimports.com.au


































































































   70   71   72   73   74