Page 66 - Australasian Paint & Panel magazine July-August 2022

Gunwashes
66
PAINT&PANEL JULY / AUGUST 2022
DRESTER GUN WASHES
DRESTER UNITS ARE SUITABLE FOR
both solvent based and waterborne cleaning. The Quattro C (DB44C) has four working stations, which can all be used simultaneously, independently of each other, the Triple C has the first three workstations listed below.
The working stations are:
• Automatic washing station, using re-
circulating solvent and automatic clean rinse.
• Manual sink, equipped with a flow through brush using re-circulating solvent and a spray handle using clean solvent.
• Sink for manual cleaning, equipped with a paint channel rinse gun using clean water and a flow –through brush using recy- cled water.
• Automatic washing station using re-circulating waterborne solvent (like Drester AquaSolve)
DRESTER QUICKRINSE TT
THE DRESTER QUICKRINSE BY HEDSON
has been developed to provide quick, thorough spray gun cleaning for water- borne or solvent paints, especially for use with disposable cup system. It can be easily installed anywhere in the paint shop, including inside the paint booth when used as a waterborne cleaner. Installation is simple and easy, either with the use of magnets for at- tachment to the booth or mixing room walls or more permanently with zip screws. Save time by keeping the gun cleaner close to the paint job.
With a Drester QuickRinse, you clean the gun’s paint channel in less than 10 seconds. The TT cleans both water and solvent.
Benefits include:
• For all disposable cup systems
• For quick and safe colour change
• For water or solvent
• High Pressure/flow cleaning of water
by pump
• For use anywhere, even inside the
booth (water only)
For further information, contact SAPE Group: (02) 9772 9000 or visit shop.sape. com.au