Page 74 - ASME IMECE 2015 Program

Technical Program TRACK 2

3:48pm 4:24pm
On the Development of a Modular 3D Bioprinter for Research in Biomed- Stability Prediction of Milling Process with Closed Machining System Dy-
ical Device Fabrication namics with Flexible Thin-Walled Workpiece
Technical Paper Publication. IMECE2015-51555 Technical Paper Publication. IMECE2015-51454

Prashanth Ravi, Panos Shiakolas, Jacob Oberg, Ankit Batra, Shahid Chao Xu, Tsinghua University, Shenzhen, Guangdong, China, Pingfa Feng,
Faizee, University of Texas at Arlington, Arlington, TX, United States Dingwen Yu, Zhijun Wu, Jianfu Zhang, Tsinghua University, Beijing, China

4:06pm 4:42pm
Design of an Personalized Skin Grafting Methodology Using an Additive Investigation of the Relation between Tube Spacing and Tube Sheet De-
Biomanufacturing System Guided by 3D Photogrammetry formation in Heat Exchangers Due to the Mechanical Rolling Process: A
Technical Paper Publication. IMECE2015-51990 Numerical Study
Technical Paper Publication. IMECE2015-53636
Houzhu Ding, Stevens Institute of Technology, Jersey City, NJ, United States,
Filippos Tourlomousis, Azizbek Babakhanov, Robert C. Chang, Stevens Søren Madsen, Aalborg University, Aarhus V, Denmark, Bo Gervang, Aarhus
Institute of Technology, Hoboken, NJ, United States University, Aarhus C, Denmark, Claus H Ibsen, VP Industries, Lem, Ringko-
bing, Denmark, Anders S Kristensen, Aalborg University Esbjerg, Esbjerg,
4:24pm Denmark
Evolution of the Microstructure during the Process of Consolidation and
Bonding in Soft Granular Solids
Technical Presentation. IMECE2015-52519

Bereket Yohannes, Rutgers, The State University of New Jersey, Piscataway,
NJ, United States, Marcial Gonzalez, Purdue University, West Lafayette, IN,
United States, Admassu Abebe, Omar Sprockel, Faranak Nikfar, San Ki-
ang, Bristol-Myers Squibb, New Brunswick, NJ, United States, Alberto Cu-
itino, Rutgers, The State University of New Jersey, Piscataway, NJ, United
States

2-11
COMPUTATIONAL MODELING AND SIMULATION FOR ADVANCED
MANUFACTURING

2-11-4
COMPUTATIONAL MODELING AND SIMULATION FOR ADVANCED
MANUFACTURING—4

360C 3:30PM–5:00PM
Session Chair: Nishu Trivedi, B.H.Gardi College of Engineering and Technol-
ogy, Gujarat, India

3:30pm
Challenges Moving from Physical into Virtual Verification of Sheet Metal
Assemblies
Technical Paper Publication. IMECE2015-51024

Björn Lindau, Mikael Rosenqvist, Lars Lindkvist, Rikard Soderberg, Chalm-
ers University of Technology, Goteborg, Sweden

3:48pm
CFD Multiphase Flow Modeling of Air Porosity Defect Formation during
High-Pressure Die-Casting Filling Process
Technical Paper Publication. IMECE2015-51051

Yueh-jaw Lin, Jane Hao, Yi Nie, University of Nottingham Ningbo China,
Ningbo, Zhejiang, China

4:06pm
Initial Fracture Behavior of Intra CF/GF Woven Fabric Composites
Technical Paper Publication. IMECE2015-51267

Zhilan Xu, Daiki Ichikawa, Yuqiu Yang, Kyoto Institute of Technology, Kyoto,
74 Japan