Page 104 - Icon Ridge Hardware & Fixing Technology Catalog

DIN and Standard Parts

Blind Rivet Nuts, Countersunk Head, 90° Aluminium

• For flush connections

Specifications
Clamping range Drill dia. d D L K
Article No. Dimension QTY mm mm mm mm mm mm
2741 4 25 M4-2,5 gf 100 1.5 - 2.5 6.1 6.0 7.0 11.5 0.5
2741 4 4 M4-4 gf 100 2.5-3.5 6.1 6.0 7.0 12.5 0.5
2741 5 35 M5-3,5 gf 100 0.5-1.5 7.1 7.0 8.0 11.0 0.5
2741 5 45 M5-4,5 gf 100 1.5-2.5 7.1 7.0 8.0 12.0 0.5
2741 6 3 M6-3 gf 100 1.0-2.5 7.1 7.0 8.0 13.0 0.5
2741 6 45 M6-4,5 gf 100 2.5-3.5 9.1 9.0 10.0 14.0 0.5
2741 8 3 M8-3 gf 100 1.0-2.5 9.1 9.0 10.0 15.5 0.5
2741 8 45 M8-4,5 gf 100 2.5-4.0 11.1 11.0 12.0 15.5 0.5
2741 10 3 M 10-3 gf 100 2.5 - 4.0 11.1 11.0 12.0 17.0 0.5
(Thread dia. x length mm)

Blind Rivet Nuts Flat Head
•Galvanized steel
• With hex shank in clamping zone to prevent
twisting
Specifications
Clamping range Hole SW D L K
Article No. Dimension QTY mm SW 1 mm mm mm
2743 4 M4 gf 100 0.5 - 3.0 6.1 6.0 9.3 11.5 1.0
2743 5 M5 gf 100 0.5 - 3.0 7.1 7.0 10.3 13.5 1.0
2743 6 M6 gf 100 0.5 - 3.0 9.1 9.0 12.3 15.5 1.5
2743 8 M8 gf 100 0.5 - 3.0 11.1 11.0 14.3 17.5 1.5
(Thread dia.)

Blind Rivet Nuts Miniature

Countersunk Head

•Galvanized steel
• For flush connections without countersinking holes
Specifications
Rivetable material Drill dia. Shank dia. L
Article No. Dimension QTY
thickness mm mm mm mm
2744 4 4
2744 M4 gf 100 0.5-3.0 7.0 6.95 10.5
2744 5 5 M5 gf 100 0.5-3.0 7.0 6.95 11.5
2744
2744 M6 gf 100 0.5-2.5 8.0 7.95 13.0
2744 6 6
2744 8 8
2744 M8 gf 100 0.5-3.0 10.0 9.95 15.5
2744 10
2744 10 M10 gf 100 0.5-3.0 12.0 11.95 17.5
(Thread dia.)
Blind Rivet Nuts, Small Countersunk Head, Knurled
• Galvanized steel
• For high resistance to twisting in soft materials
e.g. plastic, aluminium, wool, asbestos etc.

Specifications
Rivetable material Drill dia. Shank dia. L
Article No. Dimension QTY thickness mm mm mm mm
2745 4 M4 gf 100 0.5 - 3.0 6.0 5.9 10.0
2745 5 M5 gf 100 0.5-3.0 7.0 6.9 11.5
2745 6 M6 gf 100 0.5-3.0 9.0 8.9 14.0
2745 8 M8 gf 100 0.5-3.0 11.0 10.9 15.5
2745 10 M10 gf 100 0.8-3.5 12.0 11.9 22.0
(Thread dia.)

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 104