Page 246 - Icon Ridge Hardware & Fixing Technology Catalog

Fixing technology

Injection Mortar VMZ 345

• Styrene-free injection mortar with ETA (European Technical Appro-
val) Option 1 for cracked and uncracked concrete; minimum strength
class: C 20/25 and maximum strength class: C 50/60
• Approved in connection with anchor rod VMZ made of galvanized
steel or with anchor rod VMZ made of stainless steel (A4) with the
sizes M8-M24
• Can be used for medium and heavy load range. High load bearing
capacities, small edge and axial distances (see approval)
• Styrene-free medium polyester resin, odourless. Tested for fire resi-
stance.
• Side-by-Side cartridge with 345ml contents
• Suitable for wet and dry concrete. From dowel size M12, it can also
be used for water filled drill holes.
Application:
Anchoring of heavy loads in cracked and uncracked concrete such
as steel girders, steel supports, railings (also on bridges), brackets and
facades. The stainless steel version A4 may be used in damp rooms
and outdoors.

Technical Data
Temperature +40°C +30°C +20°C +10°C +5°C 0°C -5°C
in drill hole
Applicat. temp. min 1.4 4 6 12 20 45 90

Hardening time min 15 25 45 80 120 180 360
Dry concrete

Article No. Article Description QTY
8180 345 INJECTION MORTAR VMZ 345 e 12

Instruction:

Create drilled hole Clean drilled hole. Fill the composite Press in anchoring Comply with hardening Mount component.
mortar starting from element up to bottom time of composite
base of drilled hole. of drilled hole while mortar
turning slightly.

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 246