Page 113 - Icon Ridge Automotive & Truck Catalog (1)

Workshop Requirements, Workshop Devices

Rail set SEG IV

• Rail set for stationary installation for measuring the headlight with the
SEG IV
• Standing area of the vehicle and rail level for the SEG must be paral-
lel to each other in both extensions
• The difference in height of the two rails may not be more than 1 mm
• The rails must be supported over their entire length, so that they can-
not bend
• The rails are laid in pairs at 90° to the longitudinal axis of the vehicle,
lateral shifting on the abutting rails must be avoided
• The headlight adjustment area must comply with the testing regulati- Total view
ons pursuant to Section 29 of the Road Traffic Regulations (StVO)

Technical Data
Material thickness: 2 mm
Total length per rail: 1,500 mm
Total width per rail: 83 mm
Difference in height of the rails: 1 mm
Hole diameter: 8 mm Front view
Drill hole depth: min. 40 mm

Article No. Article Description QTY
5439 43 1 RAIL SET FOR SEG IV 1

Scope of delivery:
• 1× Spacer rail
• 1× Roller rail
• 1× Fixing material (anchors and screws 8 × 40)

1 Difference in height max. 1 mm 2 Shims 3 Rail joint witout lateral displacement 4 Rolled section not more than 1 mm

7
Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 113