Page 414 - Icon Ridge Automotive & Truck Catalog (1)

Hand tools

Hose clamp tightener 1/4”

• clamping range: 8-70 mm
• makes working in the tightest of rooms possible
• spanner can remain on the clamps
• wide variety of clamps can be tightened
• drive with knurled screw with which the spanner can be quickly adju-
sted to the desired width
• using the 1/4” drive can create enough power to the clamp

Article No. Article Description QTY
4920 8 70 SCHLAUCHKLEMMENSP. 1/4" 8-70MM 1

Collet for Axle Boots

• For clamping stainless steel straps with prescribed torque values in
combination with a torque wrench eg.VW, Audi, Seat, Opel, Ford,
Skoda etc.
• Also suitable for Hytrel-Axle Boots
• 3/8“ drive

Article No. Article Description QTY
4920 33 COLLET FOR AXLE BOOTS 1
4920 33 1 BAG(2)REPL.TIP F.COLLET 1
4920 33 2 CLAMP SCREW FOR 4920 33 1
Type W Hose Clip Pliers

• For self tensioning spring clips with flat clip ends (Type W)
• For use in e.g. Audi, VW, Seat, Skoda and fule lines

Article No. Article Description QTY
4920 14 SPRINGCLIPHOSECLIP.ZA.TYP "W" 1

Exhaust Manifold Clamp - Pliers

• For easy widening of exhaust clamp without overtwisting
• Used for e.g. Citroën, Renault, Peugeot, etc.
• With locking lever for adjusting in tensioned position
• Length: 300 mm

Article No. Article Description QTY
4920 17 AUSPUFFSCHELLEN-ZANGE 1

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 414