Page 476 - Icon Ridge Automotive & Truck Catalog (1)

Hand tools

Crash-Check

Electronical rapid-tester for the examination of the vehicle paint
and the thickness of a body coating on steel.
• Crash-Check is a tester with an electronical magnet-sensor which finds
out damaged spots without any problem, e. g. repaintings, accidental
repairs with filler or rusted spots and steel car bodies.
• Especially suitable when purchasing vehicles to find possible
damages.
Application:
• Simply put the Crash-Check on the car body and press the button.
• The sensor-electronic is able to show any spot which is not visible to
the naked eye:
• Green: paint is not thicker than the original condition. Thickness up to
180 µm.
• Yellow: paint thickness in threshold value. Thickness up to 450 µm.
• Red: Attention! Too thick coating – spatula, accident, rust. Thickness
up to 450 µm.

Article No. Article Description QTY
5439 22 CRASH-CHECK 1
Suitable battery: E-Block 9V Art. No. 3880 9 (included in delivery)

Coat Thickness Gauge

The coat thickness gauge is especially suitable for automotive
and painting applications.
• High accuracy over the total measuring range
• Only one function key
• Approved reverberation sensor-technics and eddy-current technics
• Single-handed manipulation for all measurement problems
• Integrated measuring probe without cable or connector
• Automatical switch on/off
• Selectable metrical or inch display
• Acoustic signal during the measurement
• The coat thickness gauge was especially adapted for automotive
and painting applications.The gauge not only allows mesurement on
steel and iron but also on non-ferrous-metals. It can changed bet-
ween both measuring methods by pressing the button.
LCD-Display for:• Measured value
• Battery condition
• Measuring unit
• Mode of operation
• Serial number
Technical Data
Base material (substrate)
Steel and iron: Fe-sensor (4200/4500)
Non-magnetic metals e.g.
Aluminium, copper, brass: NFe-sensor (4500)
Measuring range Fe 0 - 3000 µm
(4200/4500): 0 - 2000 µm
Measuring range NFe (4500): +/-(2 µm + 3%*)
Measuring accuracy: 5 mm convex, 25 mm concave
Smallest radius of curvature: Fe: 0.2 mm
Article No. Article Description QTY Smallest thickness of the NFe: 0,05 mm
5439 24 COAT THICKNESS GAUGE 4500 1 base material: 0°C - 60°C
Temperature range: digital (LCD)
Included in delivery: Display: integrated single-point
• Coat thickness gauge Measuring sensor: 2 x 1.5 V Migon batteries 3880 15
• 2 x 1.5 V Mignon batteries, Art. No. 3880 15 1 Current supply: 1
• Box with devices Dimensions: 100 mm x 60 mm x 27 mm
• Operation instructions Weight: approx. 110 g

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 476