Page 743 - Icon Ridge Automotive & Truck Catalog (1)

Vehicle products

Four-Way Socket Spanner

• DIN 3119 / ISO 6788
• Chrome-vanadium-steel

Technical Data
Art.-No. Measurement Design
4951 1 420 × 420 mm
4951 2 1 380 × 380 mm With 1/2” square-socket wrench intake
4951 3 550 × 550 mm With very large turned waist
4951 4 550 × 550 mm With very large turned waist and
1/2” square-socket wrench intake
4951 5 600 × 600 mm 4951 1 4951 3
4951 6 750 × 750 mm With 3/4” square socket wrench intake
4951 2 1 4951 4
4951 7 750 × 750 mm With very large waist and 4951 9
3/4” square-socket wrench intake
4951 9 355 × 355 mm

Article No. Article Description QTY
4951 1 FOUR-W.SOC.SPAN.17X19X21X11/16 1
4951 2 1 FOUR-W.SOC.SPAN.17X19X21X11/16 1
4951 3 FOU-W.SOC.SPANNER 17X19X21X24 1
4951 4 FOU-W.SOC.SPAN.17X19X21X1/2-4K 1
4951 5 WHEEL SPIDER 19X22X24X27 1 4951 5 4951 7
4951 6 WHEEL SPIDER 27X32X24X3/4-4K 1 4951 6
4951 7 WHEEL SPIDER 27X30X32X3/4-4K 1
4951 9 FOUR-W.SOC.SPAN.17X19X22X13/16 1
(SW mm)

Kraft - Torsion-Socket Wrench 1/2“

• Length: 220 mm
• With torque limitation
• For controlled tightening of wheel nuts with impact nutsetters
• Prevention of dangerous overexpansion of the bolt
• As the torsional values depend on the type and performance of the
used impact nutsetter (should show at least the fourfold torque of the
torsion-socket wrench), it is recommended to do the checking with a 4568 17 75
torque spanner
• Only for clockwise rotation and thus a damage of the torsion zone
due to high torques is prevented while loosening the screws . 4568 17 110

Article No. Article Description QTY
4568 17 75 1/2"TORQUE BAR SW17 75NM GREEN 1 ü 4568 19 90
4568 17 110 1/2"TORQUE BAR SW17 110NM RED 1 ü
4568 19 90 1/2"TORQUE BAR SW19 90NM YELL. 1
4568 19 110 1/2"TORQUE BAR SW19 110NM BLUE 1 ü
4568 21 110 1/2"TORQUE BAR SW21 110NM BRO. 1 ü
4568 19 110

4568 21 110

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 743