Page 750 - Icon Ridge Automotive & Truck Catalog (1)

Vehicle products

Wheel Lock Opener Set for Tyre Protection

• 10-piece
• Opens almost all wheel buckles without damage
• Conical fit enables max. force
• In plastic case
Instructions for use:
• Remove grease from the sleeves before use and roughen with
abrasive paper!
• Only use the tool at ambient temperatures of more than 20° C. If ne-
cessary, warm up the sleeves before use.
1. Fit the fitting sleeve over the tyre protector. Use a heavy hammer to
hammer the sleeve straight onto the tyre protector. If the screws are
deep-seated, use the impact mandrel.
2. Screw out the tyre protector with the cross spanner.
3. Remove the tyre protector from the sleeve using the impact man-
drel and put it in the vice (see picture). The sleeves are conical inside
and are able to adapt to all intermediate sizes. (Recommendation:
abrade the sleeves in 2 mm-steps)
Note:
• If the tyre protectors are tightly jammed before application of the
sleeves, compress the tyre protectors!
• To do this, use the impact mandrel and the 2,000 g hammer.

Article No. Article Description QTY
3530 10 WHEEL LOCK OPENER SET II 1
Contents:
• 2x mandrels
• 8x conical demounting sleeves

Wheel Lock Opener Set - Accessories

Article No. Article Description QTY
3530 10 18 DEMOUNT.SLEEVE 18MM 80.01.18AN 1
3530 10 19 DEMOUNT.SLEEVE 19MM 80.02.19AN 1
3530 10 20 DEMOUNT.SLEEVE 20MM 80.03.20AN 1
3530 10 21 DEMOUNT.SLEEVE 21MM 80.04.21AN 1
3530 10 22 DEMOUNT.SLEEVE 22MM 80.05.22AN 1
3530 10 23 DEMOUNT.SLEEVE 23MM 80.06.23AN 1
3530 10 24 DEMOUNT.SLEEVE 24MM 80.07.24AN 1
3530 10 25 DEMOUNT.SLEEVE 25MM 80.08.25AN 1

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 750