Page 53 - Industrial Tools Catalog (3)
P. 53
CNC tool storage \ CNC wing door/roller shutter cabinets for tool chucks
Roller shutter cabinets equipped with plastic inserts
For CNC tool chucks SK 40, SK 50 or HSK 63
Execution: Notes:
Sturdy sheet steel structure, lockable with grip Accessories for extra equipment: Three support
handle and cylinder lock, including 2 keys profiles no. 50658 110-158 can be inserted per
With 5 pairs of guide rails, including 7 supporting storage level. One pair of guide rails no. 50658 100
profiles is required per storage level. Please consider when
Supporting profiles are equipped with SK or HSK ordering. If drawers are fitted at a later time, the
cabinet must be secured against tilting (anchored to
adapter holders (number of holders, refer to table) wall or floor).
Rails are inclined (15°), can be staggered against Ident. No. 020 (without tools)
each other and height can be adjusted in incre- Technical data:
ments of 30 mm to accommodate tools of different Number of carrier sections: 7 PCS
length Load-carrying capacity per carrier section: 50 kg
Up to 3 supporting profiles can be used per pair Load-carrying capacity per rail pair: 150 kg
of rails Load-carrying capacity: 1000 kg
Forklift-compatible base with removable base Central locking: Yes
fascia for in-house transport Lock type: DOM® locking system
Material: Sheet steel
Surface: Powder-coated
Equipped SK 40 SK 50 HSK 63
Number of attachments 140 pieces 70 pieces 119 pieces
Height (mm) 1950 1950 1950
Width (mm) 1018 1018 1018
Depth (mm) 620 620 620
Body colour Colour of front
50658... Light grey RAL Light grey RAL Ident. No. 020 + 022 + 024 +
(○)
(○)
7035
7035
(○)
50658... Optional Light grey Ident. No. 021 + 023 + 025 +
(○)
(○)
(○)
Prod. Gr. 507
for colours deliverable without a surcharge, see page 1434
Support profiles for CNC tool chucks
For modular cabinet housing, nos. 50658 005-016
Application: per storage level must be ordered for fitting in cabinet housing no. 50658 005-
For clearly-laid-out storage and retrieval of CNC tools. 074. Please consider when ordering. Other holders such as Capto C3 or Capto
C4 available upon request.
Execution:
Made of sheet steel Technical data:
Equipped with plastic inserts to accommodate CNC tools Width: 942 mm
Depth: 160 mm
Notes: Load-carrying capacity per carrier section: 50 kg
One pair of support brackets no. 50658 160 per storage level must be ordered Colour: Light grey RAL 7035
for fitting in shelf no. 50658 050-052. One pair of support rails no. 50658 100
Ident. No. 115
CNC tool shelf fitted with support profiles combined Cabinet fitted with 3 support profiles on one storage
with support angle ref. no. 160 level with different mounts
Tool holding device SK 30 SK 40 SK 50 VDI 20 VDI 25 VDI 30/TR VDI 40/MK 5 HSK 40
28/MK 4
Number of attachments 26 pieces 20 pieces 10 pieces 26 pieces 10 pieces 26 pieces 20 pieces 32 pieces
50658... Ident. No. 110 115 120 125 128 130 135 140
○
○
○
○
○
○
○
○
Tool holding device HSK 50 HSK 63 HSK 80 HSK 100 Capto C5 Capto C6 Capto C8
Number of attachments 24 pieces 17 pieces 10 pieces 9 pieces 10 pieces 10 pieces 8 pieces
50658... Ident. No. 145 150 151 152 155 156 158
○
○
○
○
○
○
○
Prod. Gr. 507
Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com 1479
Availability subject to country specific rules and regulations
