Page 293 - Icon Ridge Maintenance & Service Catalog

Hand tools
Hand tools
Indicator

• Simple zero position due to turnable outer ring
• Adjustable tolerance marks
• With flat cover and eyelet cover
• Impact protected
• Metal housing, matt chrome
• Insert: ø 8 mm

Technical Data
Measuring range: 0 - 10 mm
Article No. Article Description QTY Resolution: 0.01 mm
4715 5 10 4 PRECISE INDICATOR 0-10MM 5* 1 Pointer rotation: 1.0 mm
Digital dial indicator

• aluminium housing with stable plastic cover
• LCD display with digit height of 10 mm
• with data output
• measuring pins and clamping shaft rust-free, toughened and polis-
hed
• exchangeable measuring pin M2.5
• on / off button
• switch from absolute to relative display
• test pre-setting using pre-set function
• zero position in any position
• max and min value display
• can be measured in either mm or inches
• tolerance mode: by establishing limits, deviations are displayed using
an optimum signal
• with flat cover and eyelet cover
• insert: Ø 8 mm
• in plastic box
• suitable button cells: Art. no. 3882 27 (in delivery scope)
• suitable data cable: Art. no. 4715 5 012 41
Article No. Article Description QTY Technical Data
4715 5 012 4 FLAT SCRATCH GAUGE 0-12.7MM 5* 1 test range: 0 - 12.7 mm / 0 -0.5 inch
4715 5 012 41 DATA CABLE F. FL.SCRATCH GAUGE 1 increase: 0,01 mm / 0,0005 inch
3882 27 COIN CELL CR 2032 3V e 5 gauging pressure: ‹ 1.50 N

Magnetic gauge tripod

• high-gloss chrome-plated rods with fine adjustment
• painted magnetic foot with on / off twist switch
• polished reverse side as bearing surface
• prismatic sole
• locating hole for dial indicators Ø 4 mm and Ø 8 mm

Technical Data
total height: 280 mm
rods Ø x L: 16 x 220 mm
reach: 200 mm
thread: M10
Article No. Article Description QTY magnet base L x B x H: 65 x 50 x 55 mm
4715 5 280 MAGNETIC GAUGE TRIPOD 280MM 5* 1 magnetic power: 600 Nm

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 293