Page 333 - Icon Ridge Maintenance & Service Catalog

Drilling, Milling, Tapping and Threading

Twist Drill ‘Bullet’ DIN 338 HSS, Ground

• Right-hand cutting
• Split point
• Point angle 118°
• No need to punch-mark
• For freehand drilling in thin-walled materials
• Center point guarantees precise drilling. Exact and non-splintering
drilling with the shoulder cutting edges, with round hole edges (from
Ø 4.8 mm)
• Skid resistant shank with 3 milled bearing areas prevents twisting of
the drill in chuck (from Ø 5.0 mm)
Applications:
• For alloyed and unalloyed steels up to approx. 900 N/mm² strength, shaft polished 120 °
alloyed and non-alloyed steels, cast steel, grey cast iron, sintered
iron, sheet and thin-walled profile material (pipes), copper, bronze,
brass, wood and plastics
Technical Data
Article No. Article Description QTY Ø mm Length mm Groove length mm Recomm. rpm
5504 10 TWIST DRILL BULLET 1.0 10 1.0 34 12 2,200
5504 15 TWIST DRILL BULLET 1.5 10 1.5 40 18 2,200
5504 20 TWIST DRILL BULLET 2.0 10 2.0 49 24 2,200
5504 25 TWIST DRILL BULLET 2.5 10 2.5 57 30 2,200
5504 30 TWIST DRILL BULLET 3.0 e 10 3.0 61 33 2,200
5504 35 TWIST DRILL BULLET 3.5 e 10 3.5 70 39 2,200
5504 40 TWIST DRILL BULLET 4.0 e 10 4.0 75 43 1,800
5504 45 TWIST DRILL BULLET 4.5 e 10 4.5 80 47 1,800
5504 50 TWIST DRILL BULLET 5.0 e 10 5.0 86 52 1,500
5504 55 TWIST DRILL BULLET 5.5 e 10 5.5 93 57 1,500
5504 60 TWIST DRILL BULLET 6.0 e 10 6.0 93 57 1,200
5504 65 TWIST DRILL BULLET 6.5 e 10 6.5 101 63 1,200
5504 70 TWIST DRILL BULLET 7.0 e 10 7.0 109 69 1,200
5504 75 TWIST DRILL BULLET 7.5 e 10 7.5 109 69 1,200
5504 80 TWIST DRILL BULLET 8.0 e 10 8.0 117 75 1,000
5504 85 TWIST DRILL BULLET 8.5 e 10 8.5 117 75 1,000
5504 90 TWIST DRILL BULLET 9.0 e 10 9.0 125 81 1,000
5504 95 TWIST DRILL BULLET 9.5 e 10 9.5 125 81 1,000
5504 100 TWIST DRILL BULLET 10.0 e 10 10.0 133 87 800
5504 110 TWIST DRILL BULLET 11.0 e 5 11.0 142 94 800
5504 120 TWIST DRILL BULLET 12.0 e 5 12.0 151 101 800
5504 130 TWIST DRILL BULLET 13.0 e 5 13.0 151 101 650

Twist Drill Set ‘Bullet’ DIN 338 HSS, Ground

• 19-pcs in drill box

Article No. Article Description QTY
5509 5504 BULLET DRILL SET 1-10 19PIECES 1

Contents:
• Each 1× twist drill Bullet DIN 338 HSS, ground
Ø 1.0 - 10.0 mm (increments of 0.5 mm)

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 333