Page 344 - Icon Ridge Maintenance & Service Catalog

Drilling, Milling, Tapping and Threading

Weld Spot Drill TIAN

• Hard metal cutter with CVD-wear protection coating Titan-
Aluminium-Nitrid
• Suitable for weld spot drill FAST DRILL (Art.-No. 5352 3)

Article No. Article Description QTY
5352 3 1 WELD SPOT DRILL TIAN 8/44MM e 10

Welding Spot Drill Tungsten Carbide 8 and 10 mm

• In combination with Welding Spot Drill FAST DRILL ideal for high-
strength car body sheets:
- Material hardness non-welded: 560 HV / 52HRC / 2,200 MPa
- Material spotted: 760 HV /62HRC / 2,600 MPa
• Service life 80 – 120 drillings in high-strength sheets 5352 3 2
• Afterwards up to 1,000 drillings into standard sheets possible (in
combination with FAST DRILL)
• Hardness 3,100 HV (according to Vickers test procedure)
• Heat resistant up to 1,100 °C
• High sliding wear resistance 5352 3 3
• Suitable for welding spot drill FAST DRILL (Art.-No. 5352 3)

Technical Data
Type: Double cutter
Material cutter: Wolfram Karbid (hardness 1,400 HV)
Material carrier: Steel
Connection: soldered
PVD coating: AlCrN-based (hardness 3,100 HV)
Temperature protection
of coating: 1,100 °C
Friction coefficient: 0,24 µG (dry against steel)
Speed: 700 – 800 / max. 1,000 min⁻¹

Article No. Article Description QTY
5352 3 2 WELD SPOT DR. DURADRILL 8/44MM e 10
5352 3 3 WELD SPOT DR.DURADRILL 10/44MM e 10

Welding Spot Cutter DL

• Material: HSCO
• Shank-Ø: 8 mm
• Suitable for welding spot drill (Art.-No. 5352 1)

Article No. Article Description QTY
5352 90 65 WELDING-SPOT CUTTER 6.5/45MM 1 z
5352 90 65 1 WELDING-SPOT CUT.6.5/45MM TIN 1 z
5352 90 80 WELDING-SPOT CUTTER 8/45MM 1 z
5352 90 80 1 WELDING-SPOT CUTTER 8/45MM TIN 1 z
(Cutter-Ø mm / length, mm / version)
Solid Hard Metal Weld Point Cutter with 3 Cutters

• Material: solid metal (VHM)
• 3 cutting drills for high-strength sheets
Art.-No. 5352 8 46
• E.g. for welding spot device (Art.-No. 5352 1)
Art.-No. 5352 8 44 5352 8 46
• E.g. for ‘Vario Drill’ of Wieländer and Schill

Article No. Article Description QTY
5352 8 46 WELDING SPOT CUTTER 8.0/46MM 1
5352 8 44 WELDING SPOT CUTTER 8.0/44MM 1 5352 8 44
(Cutter-Ø mm/length mm/version)

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 344