Page 592 - Icon Ridge Maintenance & Service Catalog

Pneumatic tools

Calibrated Hand Tyre Filler with Buttons

• Operated with two buttons
• For the attachment of plug nipples AG 1/4“ unscrew the hose nozzle
and attach the adapter Art.-No. 5370 9 4

Technical Data
Working pressure: 0 - 12 bar
Weight: 0.8 kg
Hose-Ø: 8 mm
Pressure gauge-Ø: 75 mm

Article No. Article Description QTY
5370 9 MEASUREMENT DEVICE CALIBRATED 1
5370 9 2 REPL.HOSE F. DEVICE CALIBRATED 1
5370 9 4 ADAPTER 1/4"INSIDE THREAD 1

Calibrated Hand Tyre Filler, EWO

• Operation with 2-phase traction lever (filling/emptying)
• Calibrated device with 2 years guarantee
• Also suitable for tyre gas, nitrogen
Art.-No. 5370 14 2:
• According to BGI 884: Maintain a safety distance of 2.5 m to protect
against thrown off parts or a pressure wave caused by bursting of a
tyre. Therefore the hose length has to be at least 2.5 m from the plug
nipple to the inflation system.

Technical Data
Working pressure: 0 - 10 bar / 0 - 140 psi
Weight: 0,83 kg
Working temperature: -10°C to +60°C
Hose-Ø: 6 mm
Pressure gauge-Ø: 80 mm
Overpressure protection: up to 16 bar
Air connection: 1/4” AG
Suitable plug nipple: Art. -No. 3927 14 1

Article No. Article Description QTY
5370 14 HAND-TYRE FILLER CALIBRAT.EWO 1
5370 14 1 REPL.HOSE FOR TYRE FIL.5370 14 1
5370 14 2 REPL.HOSE F.T.FILL.537014 2.5M 1

Scope of delivery:
• 1x Art.-No. 5370 14: Calibrated hand tyre filler with plug nipple

= year in which the tyre filler was calibrated. (Validity: Two years)

= label applied in 2015 (validity: Two years)
As per Art. 32 of the Measurement and Calibration Act, the user of a tyre pressure measurement device must notify the responsible authorities
about it no later than six weeks after placing it into operation. The easiest way to do this is at the following Internet adress: www.eichamt.de

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 592