Page 36 - Icon Ridge Safety Products Catalog
P. 36
Working Security
approved for use when handling foodstuffs
EN 60903 insulating protective gloves for
work under electrical voltage
EN 455 medical gloves for single use
ESD (electrostatic discharge) = protection
from electrostatic discharge
EN 388 Protection from Mechanical Risks EN 374/1 Protection from Fluids and Slight
Chemical Hazards
Test Criteria Assessment Possibility Test Criteria Assessment Possibility
Abrasion Resistance 0 – 4 Penetration Test passed / failed
(Water Leak Test)
Cut Resistance 0 – 5
This pictogram is used for fluid-tight gloves, that does not meet the
Tear Resistance 0 – 4
above-mentioned requirements
Puncture Resistance 0 – 4
EN 511 Protection from Cold EN 374/2 Protection from Micro-Organisms
Test Criteria Assessment Possibility Test Criteria Assessment Possibility
Convective Cold 0 – 4 Penetration Test passed / failed
(Air / Water Leak Test)
Contact Cold 0 – 4
Water Tightness 0 – 1
EN 407 Protection from Thermal Risks (Heat EN 374/3 Protection from Chemical Hazards
or Fire)
Test Criteria Assessment Possibility Test Criteria Assessment Possibility
Burning Behaviour 0 – 4 Penetration Test passed / failed
(Air / Water Leak Test)
Contact Heat 0 – 4
Breakthrough Time
Permeation Test
Convective Heat 0 – 3 (Performane Stage 0 - 6)
Radiated Heat 0 – 4
This pictogram is used for fluid-tight gloves that have a breakthrough
Exposure to Small Spurted 0 – 4 time of > 30min. for at least 3 chemicals from the list of "Code Letters":
Molten (AKL represent the code letters for 3 of these chemicals for which the
gloves have achieved a breakthrough time > 30 min.))
Metal Particles 0 – 4
Technical data subject to change. Source: Theo Förch GmbH & Co. KG 36
Availability subject to country specific rules and regulations. www.iconridge.com
