Page 265 - Icon Ridge Industrial Tools Catalog

Thread tools \ Thread-cutting sets
Thread type x nominal Pitch (mm) Length (mm) Core hole Ø (mm) Recommended rotation Recommended rotation 13407...
Ø speed in steel (U/ speed in aluminium (U/ Ident. No.
min(rpm)) min(rpm))
M3 0.5 36 2.5 1600 1900 030 ●
M4 0.7 39 3.3 1200 1500 040 ●
M5 0.8 41 4.2 950 1200 050 ●
M6 1 44 5.0 800 950 060 ●
M8 1.25 50 6.8 600 700 080 ●
M10 1.5 59 8.5 450 550 100 ●
Prod. Gr. 1DB
Combination thread bit set
For universal use up to 700 N/mm 2

M HSS
1xd
Application: M5, M6, M8, M10 for high requirements in terms of
For producing metric threads (drill, thread, deburr process reliability and service life
and clean thread in one operation!) for portable
use on cordless drill screwdrivers and hand drills Advantage:
in clockwise rotation and anti-clockwise rotation in ƒ Standard geometry with very good price/perfor-
steel, non-ferrous metals and (cast iron) material mance ratio
groups up to a strength of 700 N/mm up to 1xD ƒ High productivity, since drilling, thread de-burring
2
thread depth in single-part production. and thread cleaning are achieved in one operation
ƒ Robust metal box protects the tool from damage
Execution: and contamination
ƒ Precision-ground, right-hand screw tap set with
drill step and 1/4“ hexagon drive, HSS for M3, M4,
Composition of set 1 of each combi screw tap bit M3/M4/M5/
M6/M8/M10
13407... Ident. No. 200
●
Prod. Gr. 1DB
Tap drilling — thread cutting — deburring

p. 284
Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat.
2
No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC
13407200 ˜ ˜ ˜ ˜ ˜ ˜ ˜ ˜ ˜
WALTON screw tap extractor

Application: Execution:
No. 13510–13512: For extracting broken screw taps. ƒ No. 13510: Extractor with 3 steel flutes and spring
When the retaining ring is displaced, the fingers are steel fingers No. 13510
introduced into the screw tap flutes and secured ƒ No. 13512: Extractor with 4 steel flutes and spring
with the guide bushing. The broken screw tap is steel fingers
loosened and screwed out by the tap wrench. ƒ No. 13514–13516: Spare spring-steel finger
No. 13514: Extractor for screw taps with 3 flutes.
No. 13516: Extractor for screw taps with 4 flutes. Advantage:
ƒ No. 13510–13512: User-friendly and rational No. 13512
removal of screw taps saves time and money
Suitable for screw thread Suitable for thread (imperial) 13510... 13512... 13514... 13516...
Ident. No. Ident. No. Ident. No. Ident. No.
M3 G 1/8 inch 030 ● - - 030 ● - -
M4 G 5/32 inch 040 ● 040 ● 040 ● 040 ●
M5 G 3/16 inch 050 ● 050 ● 050 ● 050 ●
M6 G 1/4 inch 060 ● 060 ● 060 ● 060 ●
M8 G 5/16 inch 080 ● 080 ● 080 ● 080 ●
M10 G 3/8 inch 100 ● 100 ● 100 ● 100 ●
M12 G 1/2 inch 120 ● 120 ● 120 ● 120 ●
M16 G 5/8 inch 160 ● 160 ● 160 ● - -
Prod. Gr. 139
WALTON screw tap extractor sets

Application: ƒ No. 13518 020: Extractor with 3 steel grooves
For extracting broken screw taps. Sliding the holder and spring steel fingers, 10 pieces (consisting of
ring pushes the fingers into the screw tap grooves 13510)
where they are held in place by the guide bush. The ƒ No. 13520 010: Extractor with 4 steel grooves and
broken screw tap is then loosened and removed by spring steel fingers, 6 pieces (consisting of 13512)
unscrewing using a tap wrench. ƒ No. 13520 020: Extractor with 3 steel grooves and
Execution: spring steel fingers, 10 pieces (consisting of 13512)
ƒ No. 13518 010: Extractor with 3 steel grooves and Advantage:
spring steel fingers, 6 pieces (consisting of 13510) ƒ User-friendly and efficient removal of broken taps
saves time and money

Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com 265
Availability subject to country specific rules and regulations.