Page 630 - Icon Ridge Industrial Tools Catalog
P. 630
Lathe tools \ Miniature boring range with indexable inserts from Dmin=4.8 mm
CDGT indexable inserts, positive
ISO N
Application: Advantage:
For longitudinal turning and face turning under good Very high hardness and wear resistance, for high
operating conditions at small to medium feed depths service life requirements
in the non-ferrous metals material group. Very positive chip breaker for ideal chip breaking at
Execution: low cutting depths
Ground cemented carbide indexable insert
Carbide type HW6315
Machining conditions for indexable insert Good
Vc in non-ferrous metals 160-280 m/min
ISO name min./max. ap f min./max. 17827...
Ident. No.
CDGT 040101-MN 0.1-1 mm 0.04-0.12 mm/U 700 ●
CDGT 040102-MN 0.1-1 mm 0.04-0.12 mm/U 705 ●
CDGT 040104-MN 0.1-1 mm 0.04-0.12 mm/U 710 ●
Prod. Gr. 1FL
CPMT indexable inserts, positive
ISO P
Application: Advantage:
For longitudinal turning and face turning under Perfect combination of wear resistance and tough-
average operating conditions at low to medium feed ness, for high process stability and a wide range of
depths in the steel, stainless steel and cast iron applications
material groups. Very positive chip breaker for ideal chip breaking at
Execution: low cutting depths
Sintered cemented carbide indexable insert
Carbide type HC7625
Machining conditions for indexable insert Medium
Vc in steel 110-220 m/min
Vc in stainless steel 60-120 m/min
Vc in cast iron 120-190 m/min
ISO name min./max. ap f min./max. 17827...
Ident. No.
CPMT 05T102-FP1 0.1-1.5 mm 0.05-0.15 mm/U 745 ●
CPMT 05T104-FP1 0.1-1.5 mm 0.05-0.15 mm/U 750 ●
Prod. Gr. 1FL
CPGT indexable inserts, positive
ISO P
Application: Advantage:
For longitudinal turning and face turning under good Very high hardness and wear resistance, for high
operating conditions at small to medium feed depths service life requirements
in the non-ferrous metals material group. Very positive chip breaker for ideal chip breaking at
Execution: low cutting depths
ground cemented carbide indexable insert
Carbide type HC6315
Vc in non-ferrous metals 160-280 m/min
ISO name min./max. ap f min./max. 17827...
Ident. No.
CPGT 05T102-MN 0.1-1.5 mm 0.04-0.12 mm/U 820 ●
CPGT 05T104-MN 0.1-1.5 mm 0.04-0.12 mm/U 822 ●
Prod. Gr. 1FL
DCGT indexable inserts, positive
ISO P
Application: Advantage:
For longitudinal turning and copy turning under good Very high hardness and wear resistance, for high
operating conditions with small to medium feed service life requirements
depths for the material group of non-ferrous metals. very positive chip breaker, ensures ideal chip
Execution: breaking with small cutting depths
ground cemented carbide indexable insert
Carbide type HC6315
Vc in non-ferrous metals 160-280 m/min
ISO name min./max. ap f min./max. 17827...
Ident. No.
DCGT 04T002-MN 0.1-1.5 mm 0.04-0.12 mm/U 805 ●
Prod. Gr. 1FL
Source: Hahn+Kolb Werkzeuge GmbH
630 Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations.
