Page 59 - Industrial Tools Catalog (1)
P. 59
Drilling tools \ Overview page for twist drill
micro twist drill HSSE-PM
for universal use up to 1300 N/mm 2
Application:
for machining micro holes up to a strength of 1300 N/mm . 2
advantage:
high-quality HSSE PM cutting material provides maximum toughness and is therefore less susceptible to breakage
diameter from 0.05 mm–1.50 mm
cost-effective alternative to solid carbide range
Typ
N
P
P
Max.
Cutting
drilling
Ø material depth (D) DIN P 700 1000 1300 M N K S page
N/
N/
N/
mm
2
0.05- mm 2 mm 2
11054 1.5 HSSE-PM 5xD 1899 76
mm
Multi-twist drill
Straight shank with 3-surface cut
Application:
The multi-twist drill was specially developed for mobile use on cordless drill screwdrivers (plates up to 5 mm) and electronic drills.
advantage:
Three-faced polished section on the shank ensures optimum power transmission and fastening in drill chuck. Slippage is a thing of the past. Less effort when
opening or closing in drill chuck.
40° twist angle ensures reliable removal of chippings during universal use. Higher cutting speeds with increased stability and accuracy.
Special coating in connection with relief grinding provides for maximum adhesion of the lubricant and reliable chip removal.
In the case of hand-held applications with a cordless drill screwdriver in particular, the 135° tip angle provides for a very high precision of the bore hole, a reduced
cutting edge (extension of the battery life) and optimum centring precision, thanks to the innovative centre grinding.
4 3 2 1
P
P
Max.
Cutting
Ø material depth (D) DIN P 700 1000 1300 M N K S page
N/
drilling
N/
N/
mm
2
2.0- mm 2 mm 2
11032020-130 13.0 HSSE 5xD 338 77
mm
Twist drill with soldered cemented carbide cutting insert
Application:
series and single-part production on conventional and CNC machines.
advantage:
polished chipping space ensures favourable chip removal
cemented carbide cutting insert K20 ensures long service life
ideal where high elasticity with high wear resistance is required
excellent price/performance ratio
Typ
HM N
P
P
P
Max.
H
drilling
Ø Schneid- depth (D) DIN 700 1000 1300 M N K S 65HRC page
N/
N/
stoff
N/
1.5- mm 2 mm 2 mm 2
11160 20.0 Carbide 4xD 8037 -
mm
3.0-
11162 12.0 Carbide 4xD 8037 -
mm
13.0-
11163 30.0 Carbide 4xD 8041 -
mm
Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com 59
Availability subject to country specific rules and regulations.