Page 112 - Icon Ridge Automotive & Truck Catalog

Workshop Requirements, Workshop Devices

Headlight Adjusting Device SEG IV

• For accurate and fast adjustment of headlights
• For adjusting all kinds of headlights (Bi-Lux, Halogen, Xenon, LED
and Matrix Beam LED)
• Type according to Road Traffic Licensing Ordinance (STVZO)
Section 50 Directive for testing headlight adjusting devices
• Laser positioning aid for accurate and simple alignment of the head-
light adjusting device in front of the headlight (9 V block battery Art.-
No. 3880 9 not included in delivery)
• Broadband laser for accurate and convenient, parallel adjustment of
the headlight adjusting device at the front of the vehicle
• Eccentric axle for horizontal alignment of the headlight adjusting de-
vice when the support surfaces for the car and the headlight adjus-
ting device are not at the same level
• With digital lux meter for testing that both vehicle headlights have the
same light strength
• Including covering hood
• Adjustable height from 250 mm to 1450 mm
• Weight: 38 kg

Article No. Article Description QTY
5439 43 HEADLAMP AIMING DEVICE SEG IV 1

Now everything on one screen

Example Touareg with High-Beam Example Audi A8 with Matrix Beam high-beam assistant
Assistent The vertical light-darkness boundary can be directly read from the scale. The left image
Thebright area represents the light ad- shows the correct position on the zero-line. Deviations from this position (right figure)
justment of the left headlight. The vertical require the correction value (distance to the zero line) to be transmitted to the control
light-darkness boundary (red arrow) must device by the diagnostic tester (here shown on the example of the left headlight).
be sent to the zero line. The same is mir-
rores forthe right headlight.

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 112