Page 568 - Icon Ridge Automotive & Truck Catalog

Hand tools

Slide Hammer 5 kg

Technical Data
Connecting thread: M16
Article No. Article Description QTY Total weight: 800 mm
4908 201 SLIDE HAMMER W.ARTIC.PIECE 5KG 1 Weight: approx. 5 kg

Slide Hammer 9 kg

• As an attachment for different pulling devices or removal disks to
knock out hubs of wheels, full-floating axles, etc.
• Unlike other slide hammers which are available on the market, the
handle is not screwed on this device but cast on; the integrated hand
protection is extra large in order to avoid dolorous squeezing when
working
• Using this slide hammer it is possible to achieve forces of up to
about 8 to 9 tons, therefore, please make sure that your pulling de-
vice is of sufficient stability Technical Data
Connecting thread: M16
Article No. Article Description QTY Total length: 880 mm
4908 202 SLIDE HAMMER W.ARTIC.PIECE 9KG 1 Weight: approx. 9 kg

Practi-Hook

• Forged
• Appropriate for slide hammer Art. No. 4908 201 and Art. No. 4908
202

Article No. Article Description QTY
4908 203 PRACTI-HOOK 1

Arched Hook

• To disassemble the transverse control arm from the supporting joint
clamping bore
• Height: 30 mm, width: 40 mm
• Appropriate for slide hammer Art. No. 4908 201 and Art. No. 4908
202

Article No. Article Description QTY
4908 204 ARCHED HOOK EXTRA BIG 1

Pulling Device

• Pulling out hubs of wheels, full-floating axles, brake drums, etc.
• Appropriate for slide hammer Art. No. 4908 201 and Art. No. 4908
202
• Bolt circle:
- Interior: 97 mm
- Exterior: 138 mm
• For wheel mounting M12x1.5

Article No. Article Description QTY
4908 205 PULLING DEVICE WITH ADAPTER 1

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 568