Page 633 - Icon Ridge Automotive & Truck Catalog

Vehicle products

Replacement Wiper Blades

• Plastic reinforced back for easy assembly
• End clamp made from stainless steel for a secure hold
• Suitable for most vehicles

Article No. Article Description QTY
3054 600 REPLAC.WIPER BLADES CAR 600MM 50
3054 700 REPLAC.WIPER BLADES CAR 700MM 50
3054 760 REPLAC.WIPER BLADES VEH. 760MM 20
3054 1000 REPLAC.WIPER BLADES VEH.1000MM 20
Instruction:
• Remove the used wiper blade
• Insert reinforced back in to all wiper clamps until the end clamp
locks
• Trim the excess length. The spare wiper blade should jut out from the
free end by approx. 12 mm
Note: Before fitting the wiper blade, check whether the
supportive back glides freely in the holding brackets. If
necessary, bend it slightly using pliers. After fitting, the wiper
must be at right angles to the windscreen. If necessary, align the
wiper arm.

Wiper blades protective cover

• Protects the rear wiper during the washing procedure in the car wash
• Transparent MDPE-protective cover
• Dimension (L × W): 60 × 7 cm
• Foil thickness: 30 µ

Article No. Article Description QTY
5419 16 P(100PCS)WIPER BL.PROT.COVER 1

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 633