Page 127 - Icon Ridge Painting, Plastering & Drywall Catalog
P. 127

Roof, Wall, Facade

         System Adhesive Roll


         • Joint adhesive for masonry joints on a roll
         • 3.5 mm thick and permanently sticky bead provides ideal adhesive  Your Advantage / Benefit
           connection and levels out irregularities
         • For very fast masonry joints in comparison with joint adhesives from  Very fast joining of damp-proof membranes to masonry
           a cartridge or tubular bag                            Preparation on the masonry possible (no time pressure)
         • Solvent-free, no environmental or indoor toxins       No pinching out of the adhesive bead possible
         Usage instructions:                                     Permanently sticky compound levels out irregularities
         • Adhesive tape can be prepared on the masonry, as the adhesive  No accessories necessary (e.g., cartridge gun, etc.)
           surface is protected by silicone paper                Very little waste (due to elimination of accessories)
         • Lay the vapour barrier up to the glued area without stretching
         • Adhesive surfaces must be absorbent, clean, dry, free of grease and
           releasing agents
         • Very large breakouts/pitting on the building structure must be levelled  Application
           off beforehand
         • Press firmly the damp-proof membrane                  Joints with masonry, rendering, plaster, etc.
         • Pay attention to the strain relief loop               Overlap bonding of damp-proof membranes
         • Avoid permanent mechanical loading of the adhesive joint
         • Strongly crumbling or fibrous substrates must be pre-treated with
           FÖRCH system primer (Art. No. 6880 1000)
         • In case of doubt, contact us



























          Technical Data
          Adhesive covered side:  Acrylate dispersion
          Substrate material:    Spun-bonded fabric
          Adhesive open side:    Hot melt adhesive
          Roll length:
          Working temperature:   +5 °C to +35 °C
          Temperature range:     -10 °C to +80 °C


          Article No.  Article Description             QTY
          8848 2 75 12 8  RO(8M)SYST.ADHES.KLIMA.ROLL 5*  5





               Related Products


           ■           System Adhesive  ■ System Primer     ■ Air-Tight Cuffs          ■ Damp-Proof Film Vario
             Tape                        Art. No. 6880 1000   AGR 8844
             Art. No. 8848 2 75 1                                                        Art. No. 8848 015 5 75
             Art. No. 8848 2 75 100
             Art. No. 8848 2 75 150











        Technical data subject to change.
        Availability subject to country specific rules and regulations.   www.iconridge.com        Source: Theo Förch GmbH & Co. KG                    127
   122   123   124   125   126   127   128   129   130   131   132