Page 14 - Icon Ridge Painting, Plastering & Drywall Catalog

Chemical products for construction

Acrylic Sealer Transparent

• For sealing Joints with low expansion
• Ageing, weather and UV-resistant
• Free of dissolver
- Physiological credible
- Universal applicable
• Generally overpaintable with customary colours and paints
Fields of Application:
• Repairing of cracks on brick works and plasters
• Sealing up of joints with a small stretching
• Connecting and sealing joints on interior fittings
Acrylic Sealer White / Grey / Brown
• Suitable for sealing up joints with a maximum of 7.5 % on movement
admission
• For indoor and outdoor uses
Acryl Sealer Transparent
• Suitable for sealing up joints with a maximum of 5.0 % on movement
admission
• Only for indoor uses
Processing advice:
• The cleaned, nonfat and dry joint should be half as much deeper (at
least 6mm) than wide
• To avoid a three-flank adhesion, fill up the joints with closed cells PE-
Round court
• At ground suctions (e. g. wood, concrete, cement and stone etc.) the
bond has to be improved by a previous coat (mixture of mass with
water 1:1 up to 1:5
• In case of doubt carry out a contact trial
• Polish with water before skin formation (approx. 5 minutes)
Art. No 6840 8303:
• Gets transparent while hardening process

Article No. Article Description QTY
6840 8300 ACRYLIC SEALER WHITE 310ML 25
6840 8301 ACRYLIC SEALER GREY 310ML 25
6840 8302 ACRYLIC SEALER BROWN 310ML 25
6840 8303 ACRYLIC SEALER TRANSP.310ML 25
6840 8624 ACRYLIC SEALER WHITE 550ML 12

Rapucryl

• High-quality, plasto-elastic, stable filler
- Free of liquor
- After hardening overpaintable with commercial colours and paints
• For unflashy reparation and sealing of joints with a minor in
spreading at brick works and different plasters,
• Corned structure
- Surface is corned like plaster
- No retouch of the joint or the crack is necessary
• Ageing, weather and UV resistant after hardening
- Applicable to interior and exterior
• Water vapour diffusion resistance µ: approx. 2,800 , 3,000
Processing advice:
• The cleaned, nonfat and dry joint should be at least 6 mm in deep
and wideness
• To avoid a three-side faced adhesion fill up the closed cellular PE-
string before
• On absorbing floors (e. g. wood, concrete, cement, stone etc.) the
adhesion will be improved due to a pre-coating (blending of the mass
with water 1:1 up to 1:5)
• In case of doubt do a contact test

Article No. Article Description QTY
6880 2 310 C(310ML)RAPUCRYL 25

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 14