Page 37 - Icon Ridge Painting, Plastering & Drywall Catalog
P. 37

Roof, Wall, Facade

         Edging Profiles, PVC


         • Material: Hard PVC
         • Side lengths: 20 × 10 mm, asymmetric
         • During filler work in connection with the plasterboard panel
         • Used as an end plate against other building elements or for forming
           joints at irregular junctions, e.g., on ceilings (visible panel end)
         • Clip onto the plasterboard panel with slight pre-tension, but do not
           trowel off
         • Fill the entire surface from the profile to the centre of the panel to
           achieve a flat, level transition


          Article No.  Article Description             QTY
          8760 1 25 2500  MTR.PVC EDG.PROFIL.12.5MM/2500  125
                           (For plasterboard panels / length mm)



          Aluminium Edge Protector, Roll

          • Two-part edge protector consists of two 12 mm wide bright
           aluminium tapes which are bonded together with a 52 mm wide kraft
           paper strip; distance between the tapes: 1 mm
          • The edge protector protects the corners and edges of the
           plasterboard panels in dry walling
          • Edges between 5° and 175° can be covered
          • The edge protector is folded over and sealed over the entire surface
          • Roll length: 30 m
          • Plaster thickness: 1.0 mm

          Article No.  Article Description             QTY
          8761 30    RO(30M)ALU EDGE PROTEC. 2-PART    e 10





          Movement Profile, PVC, Roll


          • Material: Hard PVC with soft PVC centre section
          • Width: 5.2 cm
          • Roll length: 75 m
          • Plaster thickness: 3 mm
          • Movement profile with elastic centre section for thin skim plasters
          • Used everywhere that movement is to be expected or where different
           building elements meet (e.g., ceiling-wall)

          Article No.  Article Description             QTY
          8760 3 52 7500  MTR.PVC MOVE.PROFILE 3X52X7500  75
                               (Plaster thickness × width × length mm)


          Semi-Circular Arch Profile, Hard PVC

          • Material: Hard PVC
          • Side length: 33 mm
          • PVC edge profile for forming edges of semi-circular arches in thin
           skim plasters

          Article No.  Article Description             QTY
          8760 33 3000  MTR.PVC ARCH PROFIL.33X33X3000  75
                               (Side size a × b × length mm)










        Technical data subject to change.
        Availability subject to country specific rules and regulations.   www.iconridge.com        Source: Theo Förch GmbH & Co. KG                    37
   32   33   34   35   36   37   38   39   40   41   42