Page 215 - Icon Ridge Presents ATORN

Thread tools \ Hand tap M

HSSE hand tap ( DIN 352 )
For machining stainless steel

M HSS HSSE
3xd A (6-8) D (3,5-5) C (2-3)
Application:  Ident. No. 220–400: Taper tap with notch shape A with one ring
Ident. No. 020–200: For manually tapping metric threads in through holes and  Ident. No. 420–600: Second tap with notch shape D with two rings
blind holes in the (steel), stainless steel, (cast) and special alloy material groups  Ident. No. 620–800: Hand tap, third tap (plug) with notch shape C without ring
up to a strength of 1300 N/mm in single part production.
2
Ident. No. 220–800: For producing metric threads by hand in through holes Advantage:
and blind holes, in (steel), stainless steel, (cast iron) and special alloys material  Ident. No. 020–200: Long service life and high level of process reliability
groups up to a strength of 1300 N/mm in single-part production. thanks to innovative cutting geometry for machining stainless steel and special
2
alloys
Execution:  Ident. No. 220–800: Long service life and process reliability through innova-
 Ident. No. 020–200: Set consisting of taper tap (form A), second tap (form D) tive cutting geometry in machining stainless steel and special alloys
and third tap (form C)

Ident. No. 020–400 Ident. No. 020–200, 420–600 Ident. No. 620–800
Taper tap, shape A Second tap, shape D Third tap, shape C

Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat.
2
No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC
13014020-200  
13014220-400  
13014420-600  
13014620-800  
Version Set Taper tap Second tap Third tap
Lead angle shape A/D/C A D C
13014... 13014... 13014... 13014...
Ident. No. Ident. No. Ident. No. Ident. No.
mm mm mm mm mm
M2 0.4 1.6 36 2.8 2.1 020 220 420 620
M2.5 0.45 2.05 40 2.8 2.1 025 225 425 625
M3 0.5 2.5 40 3.5 2.5 030 230 430 630
M3.5 0.6 2.9 45 4 2.9 035 235 435 635
M4 0.7 3.3 45 4.5 3.3 040 240 440 640
M5 0.8 4.2 50 6 4.2 050 250 450 650
M6 1 5 56 6 5 060 260 460 660
M8 1.25 6.8 63 6 6.8 080 280 480 680
M10 1.5 8.5 70 7 8.5 100 300 500 700
M12 1.75 10.2 75 9 10.2 120 320 520 720
M16 2 14 80 12 14 160 360 560 760
M20 2.5 17.5 95 16 17.5 200 400 600 800
Prod. Gr. 1KM

Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations. 215

0251_EN_2018_KERN[21847094]-l.indd 251 12/17/2018 3:32:09 PM