Page 426 - Icon Ridge Presents ATORN

Turning tools \ DC.. ISO indexable inserts, positive

DC.. Indexable inserts - for longitudinal and copy turning
For longitudinal and copy turning

DCMT smoothing positive
ISO P

Carbide type HC7610 HC7620
Machining conditions for indexable insert Good Medium
Vc in steel  160-380 m/min 110-320 m/min
Vc in cast iron  140-280 m/min 140-260 m/min
ISO name min./max. ap f min./max. 17864... 17864...
Ident. No. Ident. No. FP fi nishing
DCMT 070202-FP 0.1-1 mm 0.04-0.12 mm/U 047 048 FP
DCMT 070204-FP 0.1-1.5 mm 0.05-0.16 mm/U 049 050
DCMT 11T302-FP 0.1-1 mm 0.04-0.12 mm/U 051 052
DCMT 11T304-FP 0.1-1.5 mm 0.05-0.16 mm/U 053 054
DCMT 11T308-FP 0.1-2.5 mm 0.08-0.2 mm/U - - 056
Prod. Gr. 156
DCMT medium machining positive
ISO P

Carbide type HC7610 HC7620 HC7630
Machining conditions for indexable insert Good Medium Unfavourable
Vc in steel  160-380 m/min 110-320 m/min 80-220 m/min
Vc in cast iron  140-280 m/min 140-260 m/min
ISO name min./max. ap f min./max. 17864... 17864... 17864...
Ident. No. Ident. No. Ident. No. MP medium machining
DCMT MP
070204-MP 0.4-2 mm 0.12-0.2 mm/U 061 062 063
DCMT 0.16-0.25
070208-MP 0.6-2 mm mm/U 064 068 066
DCMT 0.12-0.25
11T304-MP 0.4-3 mm mm/U - - 072 073
DCMT
11T308-MP 0.6-4 mm 0.16-0.3 mm/U - - 079 080
Prod. Gr. 156

ISO M

Carbide type HC7520 HC7530
Machining conditions for indexable insert Medium Unfavourable
Vc in stainless steel  80-210 m/min 90-160 m/min
Vc in special alloys  30-60 m/min 20-50 m/min
ISO name min./max. ap f min./max. 17864... 17864...
Ident. No. Ident. No. MP medium machining
DCMT 070204-MP 0.4-2 mm 0.12-0.2 mm/U 606 607 MP
DCMT 070208-MP 0.6-2 mm 0.16-0.25 mm/U 608 - -
DCMT 11T304-MP 0.4-2 mm 0.16-0.25 mm/U 609 610
DCMT 11T308-MP 0.6-4 mm 0.16-0.3 mm/U 611 612
Prod. Gr. 156

Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations. 426

0532_EN_2018_KERN[21847800]-n.indd 533 12/17/2018 3:33:14 PM