Page 570 - Icon Ridge Presents ATORN
P. 570
Tool clamp \ Tool chucks ISO 7388-1 SK 40/50
HPH hydro expansion chuck 3°, ultra-slim ( ISO 7388-1 )
3D-printed
SK SK Form Form G 2,5 < – 0,003 ISO
30 40 AD AD/AF IK 25000 rpm 7388-1
Application: No. 23333 603–23333 612, 23333 630–23338 103:
Produced using an innovative process, the ultra-slim Hydro expansion chuck Unusually high gripping forces
combines the advantages of an expansion chuck and a shrink-fi t chuck Slimline design for a shrink-fi t chuck, therefore suitable for narrow interfering
in a single product. contours
Max. concentricity < 0.003 mm
Execution: No. 23333 620–23333 627:
Extremely high heat resistance (up to 120°C) ensures that the chuck retains its Exceptionally high clamping forces
accuracy Slimline design of a shrink-fi t chuck, therefore suitable for narrow interfering
Outstanding absorption contours
Standard tool changes as with expansion chucks without requiring additional max. concentricity < 0.003 mm
devices Delivery:
variable thanks to the use of reducer bushings No. 23333 603–23333 612, 23333 630–23338 103: with hexagon key
Balance quality at G2.5/25,000 rpm Notes:
With Balluff chip hole The previous standard DIN 69871-1 was replaced by ISO 7388-1.
A A
l1 l1
3° 3 ° 5,8 °
d d2 d3 d d2 d3
No. 23333 620–23333 627
G V
G V l2 l2
No. 23333 603–23333 612, 23333
630–23338 103 No. 23333 603–23333 612, 23333 No. 23333 620–23333 627
630–23338 103
Tool holding d (mm) A (mm) d2 (mm) D (mm) l1 (mm) l2 (mm) max. V (mm) G 23333... 23338...
device Ident. No. Ident. No.
SK 30 3 85 10 40 45 28 16 M3 630 - -
SK 30 4 85 12 40 45 28 12 M3 631 - -
SK 30 5 85 13 40 45 28 8 M3 632 - -
SK 30 6 85 14 40 46 37 10 M5 633 - -
SK 30 8 85 16 40 46 37 10 M6 634 - -
SK 30 10 85 18 40 47 41 10 M8 x 1 635 - -
SK 30 12 85 20 40 47 46 10 M8 x 1 636 - -
SK 40 3 120 9 49.5 79.5 28 - - 603 - -
SK 40 4 120 10 49.5 79.5 28 - - 604 - -
SK 40 5 120 11 49.5 80 28 - - 605 - -
SK 40 6 120 12 49.5 79.9 37 10 M5 606 - -
SK 40 8 120 14 49.5 79.9 37 10 M6 608 - -
SK 40 10 120 16 49.5 80.9 41 10 M8 x 1 610 - -
SK 40 12 120 18 49.5 81.9 46 10 M10 x 1 612 - -
SK 40 6 160 16 49.5 111 37 10 M5 620 - -
SK 40 6 200 16 49.5 152 37 10 M5 621 - -
SK 40 8 160 18 49.5 111 37 10 M6 622 - -
SK 40 8 200 18 49.5 152 37 10 M6 623 - -
SK 40 10 160 20 49.5 113 41 10 M8 x 1 624 - -
SK 40 10 200 20 49.5 154 41 10 M8 x 1 625 - -
SK 40 12 160 22 49.5 113 46 10 M10 x 1 626 - -
SK 40 12 200 22 49.5 154 46 10 M10 x 1 627 - -
SK 40 14 120 22 49.5 79 46 10 M10 x 1 - - 100
SK 40 16 120 24 49.5 79 49 10 M12 x 1 - - 101
SK 40 18 120 26 49.5 80 49 10 M12 x 1 - - 102
SK 40 20 120 28 49.5 80 51 10 M16 x 1 - - 103
Prod. Gr. 263
Compatible pull studs no. 23690 130-150
Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations. 570
0748_EN_2018_KERN[21849921]-p.indd 749 12/17/2018 3:34:06 PM
