Page 579 - Icon Ridge Presents ATORN

Tool clamp \ Pull stud/coolant transfer pipe
d (mm) D (mm) d2 (mm) L (mm) max. l2 (mm) min. l2 (mm) g 23431...
Ident. No.
6 12 10 150 36 26 M5 606 ○
6 16 10 150 36 26 M5 610 ○
6 20 10 150 36 26 M5 615 ○
6 25 - 150 36 26 M5 636 ○
6 32 20 150 36 26 M5 642 ○
8 16 12 150 36 26 M6 611 ○
8 20 12 150 36 26 M6 616 ○
8 25 - 150 36 26 M6 637 ○
8 32 20 150 36 26 M6 643 ○
10 20 14 150 42 32 M8 x 1 mm 617 ○
10 25 - 150 42 32 M8 x 1 mm 638 ○
10 32 22 150 42 32 M8 x 1 mm 644 ○
12 20 16 150 47 37 M10 x 1 mm 618 ○
12 25 - 150 47 37 M10 x 1 mm 639 ○
12 32 20 150 47 37 M10 x 1 mm 645 ○
14 25 20 150 47 37 M10 x 1 mm 640 ○
14 32 20 150 47 37 M10 x 1 mm 646 ○
16 32 20 150 50 37 M10 x 1 mm 641 ○
16 32 27 150 47 37 M10 x 1 mm 647 ○
18 32 27 150 50 40 M10 x 1 mm 648 ○
20 32 27 150 52 42 M10 x 1 mm 649 ○
Prod. Gr. 287

pull stud for steep taper DIN 69872 shape A ( DIN 69872 )
steep taper to DIN 69871 with bore for IK

IK
Application:  Case-hardened HRC 58 ± 2
for tools with steep taper in accordance with ISO 7388-1 (old standard was DIN  So , bronzed and ground thread and bore hole
69871) and ISO 7388-2 (old standard was JIS B 6339 MAS-BT)  Pull studs with o-ring = sealed
Execution: Notes:
 All pull studs made from material 16Mn Cr5 Further versions available on request (specifi cation of machine types required)
L1
L2
15°

d1 d2 d5 D
No. 23690 No. 23692
DIN 69872
23690130 and 23962130 without o-ring, other items
with o-ring

DIN 69872 69872
Suitable Form d1 (mm) d2 (mm) D (mm) d5 L1 (mm) Coolant Angle L2 (mm) 23690... 23692...
for tool supply (Degree) Ident. No. Ident. No.
holding
device
SK 30 A 13 9 13 M12 44 Yes 15 24 130 - -
SK 40 A 19 14 17 M16 54 Yes 15 26 140 - -
SK 50 A 28 21 25 M24 74 Yes 15 34 150 - -
SK 30 B 13 9 13 M12 44 No 15 24 - - 130
SK 40 B 19 14 17 M16 54 No 15 26 - - 140
SK 50 B 28 21 25 M24 74 No 15 34 - - 150
Prod. Gr. 263

Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations. 579

0759_EN_2018_KERN[21849936]-o.indd 765 12/17/2018 3:34:25 PM