Page 632 - Icon Ridge Presents ATORN

Zero point clamping system \ mounting clamping module K10.2 and K20
mounting clamping module K10.2 and K20

Application: Notes:
zero-point clamping system for clamping with optimised setup time for chip and the built-in clamping modules have high hold, feed and locking
chipless forces at very small
processing in all areas, such as in the foods, pharmaceutical and chemical installation dimensions. hydraulic pressure is only required for
industries. loosening (min. 50 bar/max. 60 bar). the modules
are mechanically locked in clamped condition. the advantage here is that there
Execution: are no disturbing lines and no leakage risk.
ƒ unlocks hydraulically deliverable on request:
ƒ lid and piston hardened - mounting sketches
ƒ repeat accuracy < 0.005 mm - automation solutions
- also deliverable as individual fl ange version
Ø D Ø D
Ø DN Ø DN
4 x K
HA
HA
M H
T H
T M
Ø D1 Ø D1
Ø LK Ø LK
Ident. No. 500 Ident. No. 500 Ident. No. 107, 501 Ident. No. 107, 501

Model without indexing with indexing with indexing
Type K10.2 K10.2 K20
Retraction force/closing force 10 kN 10 kN 20 kN
Retaining force 25 25 55
D (mm) 112 112 112
DN (mm) 22 22 32
D1 (mm) 50 50 78
H (mm) 30 30 44
HA (mm) 22 22 34
M M6 M6 M6
K (mm) - 8 8
T (mm) 22 22 34
Weight (kg) 0.6 0.6 1.4
28981... Ident. No. 500 501 107
○
○
○
Prod. Gr. 280
Multiple clamping stations K10.2
Execution: ƒ 100 and 125 mm) and positioning aids. the Advantage:
ƒ unlocks hydraulically clamping stations are ready for immediate commis- ƒ low overall height of only 36 mm
ƒ repeat accuracy < 0.005 mm sioning. connections are already bolted. Notes:
ƒ unhardened steel ƒ the clamping station with purge has 2 connections: mounting sketches, other sizes as well as clamping
ƒ the clamping systems are already equipped with 1 x open hydraulically, 1 x pneum. purge stations especially tailored to your machine deliver-
mounting holes (for the most common table ƒ the clamping station is suitable for table groove able on request.
grooves sizes 63, sizes 63, 100 and 125 mm

Ident. No. 502 Ident. No. 504 Ident. No. 506
396 366 566
250–252 36 250–252 8 36 535 200 36 8
200
200 8 Ø 20 F7
Ø 20 F7
162 Ø 20 F7
166 124 142 340 200 100 366 250–252 200 126
Ø 13,5
162
Ø 13,5 200
342 Ø 13,5 200 265 200 200 265
Ident. No. 502 Ident. No. 504 Ident. No. 506
Type 2x clamping station 4x clamping station 6x clamping station
Retraction force/closing force 2 x 10 kN 4 x 10 kN 6 x 10 kN
Retaining force (kN) 25 25 25
Weight (kg) 14 30 46
28981... Ident. No. 502 504 506 +
(○)
○
○
Prod. Gr. 280
Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations. 632
0974_EN_2018_KERN[21850254]-n.indd 975 12/17/2018 3:34:54 PM