Page 686 - Icon Ridge Presents ATORN

Force measurement and weighing technology \ Spring balances/Tensile and compressive force measuring

Spring balances with spherical probes

Application:  Error limit 0.01 x (fi nal value + measured value)
For testing and setting control elements with adjust-  Trailing pointer
able friction moments, contact forces in electrical  Ident. No. 151: Shortened sensor lever
switch gears and regulating and controlling elements
in motor vehicles. Delivery:
In case
Execution:
 Measuring possible in both directions
 Dial face with scale in centinewtons (cN) or
newtons (N)

Min./max. force of measuring 1000-10000
range 3-30 cN 5-50 cN 10-100 cN 25-250 cN 50-500 cN 100-1000 cN 300-3000 cN 500-5000 cN cN
Scale value, force (cN) 1 1 2 5 10 20 50 100 200
Meter Ø (mm) 36 36 36 36 72 72 72 72 72
Sensor length (mm) 29 29 29 29 48 48 48 48 8
Weight (g) 64 64 64 64 260 260 278 294 290
44100... Ident. No. 041 051 061 081 091 101 121 131 151

○

Prod. Gr. 440
Tensile and compressive force measuring unit
Electronic, model ZD 2
Application:  Display resolution +/- 50,000 digits
Robust, electronic handheld force measuring unit for
mobile applications, for checking actuation forces Advantage:
and rigidity of assemblies and components such as  Adjustable measuring frequency
springs, buttons, switches, levers, closures etc. This  Real-time measured data display using optional
unit is used primarily in quality assurance, incoming So TesT so ware
goods inspections, production and research and  Once saved, basic settings remain stored even
development. when the device is switched off
Execution:  Ergonomic design, therefore suitable for le and
right-handed users
 Adjustable measuring frequencies from 50 Hz to
2000 Hz  Fixed installation possible in testing devices
 Record measurement curves Delivery:
 Processor-controlled electronics with the latest Device with battery pack set, 230 V AC power supply
WINDOWS CE so ware unit/charger, SD memory card, USB connection
 Store peak values or curves in EXCEL fi les cable, CD with so ware and operating instructions,
 USB 2.0 interface for further processing and factory calibration certifi cate, transport case,
accessories
storing
 Calibration is carried out using reference meas-
uring devices or weights Technical data:
 Rechargeable batteries ensure smooth operation  Min. measurement frequency: 50 Hz
 Max. measuring frequency: 2000 Hz
 7-digit LCD display + comma, with optional  Error limit, based on end value: 0.05%
backlight  Data transmission type: USB
Min./max. force of measuring
range 0-50 N 0-100 N 0-200 N 0-500 N 0-1000 N 0-2000 N 0-5000 N
Digit increment, force (N) 0.001 0.01 0.01 0.01 0.1 0.1 0.1
Connection thread for clamping
device M6 M6 M6 M6 M6 M12 M12
44181... Ident. No. 005 010 020 050 100 200 500

○

○
Prod. Gr. 490

Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations. 686

1161_EN_2018_KERN[21850540]-q.indd 1161 12/17/2018 3:35:22 PM