Page 730 - Icon Ridge Presents ATORN

Screwdrivers \ Torque wrench
Torque wrench with ratchet
With calibration certifi cate according to DIN EN ISO 6789

Execution: Advantage:
 The torque is set by turning the handle  Robust tubular design
 With lever ratchet, suitable only for controlled  Reversible ratchet with locking push button
clockwise tightening.  Viewing window protects scale from damage Ident. No. 060
 Haptic and acoustic adjustment aid
 Audible and perceptible release when the set value Delivery:
Secure and safe transport/storage in handy cylindri-
is reached cal package
 Dual scale with Nm and lbf. . display
 Ergonomically shaped handle with comfortable, Technical data:
textured surface  With scale: Yes
 Rapid securing and opening via the locking ring
Tip size 1/4 inch 1/4 inch 3/8 inch 1/2 inch 1/2 inch 1/2 inch
Min./max. torque measuring range 1-6 Nm 2.5-25 Nm 10-60 Nm 20-120 Nm 40-200 Nm 60-320 Nm
Scale value (nm) 0.1 0.25 0.5 1 1 2
Length (mm) 234 274 355 456 551 621
Error limit (%) (%) 4 3 3 3 3 3
52240... Ident. No. 006 025 060 120 200 320

Prod. Gr. 5HC
Torque wrench with square head
With calibration certifi cate in line with DIN EN ISO 6789
Execution:  Rapid securing and opening via the locking ring
 Adjustable torque wrench Advantage:
 For holding square plug-in tools  Robust tubular design Ident. No. 120
 Haptic and acoustic adjustment aid  Plug-in square with locking push button
 Audible and perceptible release when the set value  Viewing window protects scale from damage
is reached
 Dual scale with Nm and lbf. . display Technical data:
 Ergonomically shaped handle with comfortable,  Error limit (%): 3 %
textured surface  With scale: Yes
Min./max. torque measuring range 2.5-25 Nm 10-60 Nm 20-120 Nm 40-200 Nm 60-320 Nm
Scale value (nm) 0.25 0.5 1 1 2
Insert shank square 9 x 12 mm 9 x 12 mm 14 x 18 mm 14 x 18 mm 14 x 18 mm
Length (mm) 258 312 393 488 558
52241... Ident. No. 025 060 120 200 320

Prod. Gr. 5HC
Torque wrench
With break-over mechanism
Application: Advantage:
Suitable for clockwise and anti-clockwise tightening;  The break-over release mechanism makes unin-
when the pre-set torque value is reached, the tended overtightening unlikely 1 2 3
wrench clearly and perceptibly releases and can be 20°
instantly used. Delivery: 1
Incl. adjustment tool, test certifi cate according to
Execution: DIN EN 6790
 Lockable torque wrench without scale
 The torque is adjusted using a torque wrench tester Technical data:
 Permanent adjustment can be performed in-house  Insert shank square: 9 x 12 mm
by us (if required, specify the Nm value when  Length: 105 mm
placing your order), or by the customer using a  Error limit (%): 6 %
suitable tester  With scale: No
Min./max. torque measuring range 0.4-2 Nm 1-10 Nm
52243... Ident. No. 110 120

Prod. Gr. 5HC

Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations. 730

1374_EN_2018_KERN[21850927]-u.indd 1374 12/17/2018 3:35:56 PM