Page 754 - Icon Ridge Presents ATORN

Hand tools \ Hole punches, hole saws
HSS bimetal hole saws
Made of HSS bi-metal
Application:  Cutting depth maximum 38 mm
Ident. No. 014–152: For sawing circular holes in unalloyed steel (up to 700 N/  Drill bit can be replaced with other commercially available mounts
mm ), non-ferrous metals, light metals, plastics, plaster, fi bre and plywood  Excludes mounting shank and drill bit; please order separately!
2
boards, light-weight building boards and general wood processing.  In individual packages, with information regarding cutting values
Ident. No. 160–201: For sawing circular holes in wood and wood-substitute
materials. Advantage:
 Lateral slots in the body help to remove cut parts
Execution:  More even cut, reduced vibration and heat generation and less force required
 High degree of concentricity thanks to variable teeth spacing with 4/6 teeth per inch
 Solid base plate with improved stability

Ident. No. 014–105, 111–152 Ident. No. 108, 160–201
Without drive arbor Without drive arbor
Ø (mm) 14 16 17 19 20 21 22 24
53841... Ident. No. 014 016 017 019 020 021 022 024

Ø (mm) 25 27 29 30 32 33 35 37
53841... Ident. No. 025 027 029 030 032 033 035 037

Ø (mm) 38 40 41 43 44 46 48 51
53841... Ident. No. 038 040 041 043 044 046 048 051

Ø (mm) 52 54 57 59 60 64 65 67
53841... Ident. No. 052 054 057 059 060 064 065 067

Ø (mm) 68 70 73 74 76 79 83 86
53841... Ident. No. 068 070 073 074 076 079 083 086

Ø (mm) 89 92 95 98 102 105 108 111
53841... Ident. No. 089 092 095 098 102 105 108 111

Ø (mm) 114 121 127 140 152 160 168 177
53841... Ident. No. 114 121 127 140 152 160 168 177

Ø (mm) 210
53841... Ident. No. 201

Prod. Gr. 528
Accessories
For HSS bimetal hole saws
Application: Ident. No. 330: To eject the centre a er cutting
Ident. No. 230: As mounting shank for keyhole saws from 14-30 mm in diameter
Ident. No. 250: As mounting shank for keyhole saws from 32-210 mm in Execution:
diameter  Ident. No. 210–250: Includes centring drill
Ident. No. 270: As spare centring drill for keyhole saw mounting shanks  Ident. No. 230, 250: Please note that the striking mechanism must be
Ident. No. 280: For extending the hexagon mounting shanks of keyhole saws switched off when SDS is used!
 Ident. No. 270: HSS centring drill, 6.35 mm
Ident. No. 270 Ident. No. 280
Ident. No. 210, 240
Ident. No. 230, 250
Suitable for min./max. Ø 14-30 mm 32-210 mm 14-210 mm
53841... Mounting shank with 9.5-mm Ident. No. 210 - -

hexagon drive
53841... Mounting shank with Ident. No. - 240 -
11.1-mm hexagon drive

53841... Mounting shank with SDS Ident. No. 230 250 -
drive

53841... Spare centring drill, 6.35 mm Ident. No. - - 270

300-mm extension for 9.5 280
53841... and 11.1-mm hexagon Ident. No. - -
mounting shank
53841... Ejector spring Ident. No. - - 330

Prod. Gr. 528
Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations. 754
1504_EN_2018_KERN[21855237]-v.indd 1504 12/17/2018 3:36:35 PM