Page 761 - Icon Ridge Presents ATORN

General requirements \ Tool assortments
Leather tool bag with VDE tool assortment, 17 pieces

Execution: Advantage:
 Robust, lockable leather tool case  Produced to the highest standard of quality and
 VDE tools according to DIN EN 60900 tested individually
 Pliers with two-component handle and chrome-
plated head Technical data:
 Screwdriver with protective insulation and ergo-  VDE certifi ed: Yes
nomic two-component handle
52560... Ident. No. 300

Prod. Gr. 582
Hard tool case with tool assortment, 48 pieces
60-piece

Execution: 1 voltage tester 3 x 65 mm
 Highly impact-resistant ABS plastic 1 pair of automatic wire strippers
 With solid aluminium frame 1 safety knife
 With castors and ratchet hinges 1 pair of tweezers, 110 mm
 Lockable anti-tilt cylinder locks 1 pair of multi-purpose shears
 equipped with high-quality and robust ATORN, 1 pair of side-cutters, 165 mm
ORION and branded tools 1 pair of fl at-nose round pliers, 160 mm
Advantage: 1 pair of water pump pliers, 240 mm
 For heavy-duty use 2 machinist’s hammers, 200/500 g
1 pair of combi pliers, 180 mm
Delivery: 1 plastic hammer 32 mm
1 folding wooden rule, 2 m 1 reamer, 100 mm
1 aluminium spirit level, 400 mm 1 scriber
1 tape measure, 3 m 1 fl at chisel, 175 mm
12 combination wrenches, size 6/7/8/9/ 1 set, 6 pcs,
10/11/12/13/14/17/19/22 mm (5 dri punches 2-6 mm/1 centre punch)
3 slotted screwdrivers 4.5 x 90/5.5 x 100/ 3 workshop fi les with grip, 150 mm,
6.5 x 125 mm C2: fl at/round/half-round
2 cross-head screwdrivers PH 1/PH 2 8 hex. screwdriver, 2-10 mm
4 VDE slotted screwdrivers 2.5 x 75/ 1 metal saw bow with blade, 300 mm
4 x 100/5.5 x 125/6.5 x 150 mm
2 VDE cross-head screwdrivers PH 1/PH 2 1 screw clamp, 200 mm
52560... Ident. No. 500

Prod. Gr. 580
Hard tool case with tool assortment, 48 pieces
48-piece

Execution: Delivery:
 Highly impact-resistant ABS plastic 9 combination wrenches, size
 With solid aluminium frame 8/9/10/11/13/14/15/17/19 mm, 2 Phillips screw-
 With castors drivers PH 1 x 80 mm, PH 2 x 100 mm, 1 hexagon
socket wrench insert, long, with ball head size 1.5
 Ratchet hinges to 10, 1 TX wrench set with ball head TX 9 to 40, 3
 Lockable anti-tilt cylinder locks slotted screwdrivers 4.5 x 90 mm/6.5 x 125 mm/8.0
 Equipped with high-quality and robust ATORN tools x 150 mm, 1 machinist’s hammer, 500 g, 1 pair of
combination pliers, 180 mm, 1 pair of snipe nose
Advantage: pliers, 1 pair of side cutters, 165 mm, 1 pair of water
 For heavy-duty use pump pliers, 250 mm, 1 aluminium handsaw bow,
300 mm, 10 saw blades for metal, 1 folding rule, 2 m
52560... Ident. No. 600

Prod. Gr. 582
Roller tool case with 38-piece tool assortment

Execution: screwdriver 9 piece, 1 TX screwdriver fl ap holder,
 Highly impact-resistant ABS plastic 8 piece, 1 screwdriver 4.5 x 90 mm, 1 screwdriver
 With solid aluminium frame 6.5 x 125 mm, 1 screwdriver 8.0 x 150 mm, 1
screwdriver PH 1 x 80 mm, 1 screwdriver PH 2 x 100
 With castors and ratchet hinges mm, 1 3C machinist’s hammer 0.3 kg, 1 combination
 Lockable anti-tilt cylinder locks pliers 180 mm, 2-component handle, 1 pair of snipe
 Equipped with high-quality and robust ATORN tools nose pliers 200 mm, bent, 2-component handle, 1
Delivery: pair of water pump pliers 250 mm, chrome plated, 1
pair of side cutters 165 mm, 2-component handle, 1
1 wheeled case 470 x 190 x 360 mm, 1 combina- so -face hammer, recoil-free, 30 mm, 1 utility knife
tion spanner 9 pcs 8–19 mm, 1 hexagonal socket with 18-mm snap-off blade
52560... Ident. No. 700

Prod. Gr. 582

Source: Hahn+Kolb Werkzeuge GmbH
Technical data subject to change. www.iconridge.com
Availability subject to country specific rules and regulations. 761

1587_EN_2018_KERN[21855948]-s.indd 1587 12/17/2018 3:36:44 PM