Page 111 - Icon Ridge Sanitary-Heating-Air Catalog

DIN and Standard Parts

Self-Tapping Screws with CSK Head DIN7504 O, Galv.

• With Phillips head
• Galvanized steel

Item no. Dimension QTY Item no. Dimension QTY Specifications
1352 29 13 2,9x13 HRF 1000 1352 48 19 4,8 x 19 HRF 1000
1352 35 13 3,5x13 HRF 1000 1352 48 22 4,8 x 22 HRF 1000
1352 35 16 3,5x16 HRF 1000 1352 48 25 4,8 x 25 HRF 1000
1352 35 19 3,5x19 HRF 1000 1352 48 32 4,8 x 32 HRF 1000
1352 35 22 3,5x22 HRF 1000 1352 48 38 4,8 x 38 HRF 1000
1352 35 25 3,5x25 HRF 1000 1352 48 45 4,8 x 45 HRF 1000
1352 39 13 3,9x13 HRF 1000 1352 48 50 4,8 x 50 HRF 1000
1352 39 16 3,9x16 HRF 1000 1352 55 25 5,5 x 25 HRF 1000 Thread dk k PH Sheet-
1352 39 19 3,9x19 HRF 1000 1352 55 32 5,5 x 32 HRF 1000 Dia. max. Drive metal
1352 39 22 3,9x22 HRF 1000 1352 55 38 5,5 x 38 HRF 1000 mm mm mm mm thickness
1352 39 25 3,9x25 HRF 1000 1352 55 45 5,5 x 45 HRF 1000 2.9 5.5 1.7 1 0.70 - 1.90
1352 39 32 3,9x32 HRF 1000 1352 55 50 5,5 x 50 HRF 1000 3.5 6.8 2.1 2 0.70-2.25
1352 39 38 3,9x38 HRF 1000 1352 63 25 6,3 x 25 HRF 1000 3.9 7.5 2.3 2 0.70 - 2.40
1352 42 13 4,2x13 HRF 1000 1352 63 32 6,3 x 32 HRF 1000 4.2 8.1 2.5 2 1.75 - 3.00
1352 42 16 4,2x16 HRF 1000 1352 63 38 6,3 x 38 HRF 1000 4.8 9.5 3.0 2 1.75-4.40
5.5 10.8 3.4 2 1.75 - 5.25
1352 42 19 4,2x19 HRF 1000 1352 63 45 6,3 x 45 HRF 1000
1352 42 22 4,2x22 HRF 1000 1352 63 50 6,3 x 50 HRF 1000 6.3 12.2 5.3 3 2.00 - 6.00
1352 42 25 4,2x25 HRF 1000 1352 63 60 6,3 x 60 HRF 1000
1352 42 32 4,2x32 HRF 1000 1352 63 70 6,3 x 70 HRF 1000
1352 42 38 4,2x38 HRF 1000 1352 63 80 6,3 x 80 100
1352 48 16 4,8x16 HRF 1000 1352 63 90 6,3 x 90 100
(d thread dia. x length mm)

Wing-Type Self-Tap. Screws PH Coarse Thread, Galv.

• Galvanized steel
• Drive: 4.2-4.8PH2/5.5PH3
• Wing-type self-tapping screws for fastening hard and soft wood to metal sub-constructions
without pilot hole
• Cutting tip with wings - no pilot hole required
• Wings ream out hole in (wooden) part to be fastened, preventing it from being pulled down
by the thread.
• Wings break off when they hit against the metal sub-construction
• No thread cutting required - fast and economical
• Cutting-type countersunk head sinks completely into particularly hard wood
Use:
• Attaching wood coverings such as balcony planks etc. on metal sub-constructions
• Fastening vehicle body parts etc.

Specifications

Product no. Thickness of Clamping-
subconstruction length
Item no. Dimension QTY
min./max mm max. mm
1721 42 25 4,2x25 1000 1721 42 25 1.0 / 2.5 10
1721 48 32 4,8x32 500 1721 48 32 1.0 / 3.5 15
1721 48 38 4,8x38 500 1721 48 38 1.0 / 3.5 20
1721 48 45 4,8x45 500 1721 48 45 1.0 / 3.5 30
1721 48 50 4,8x50 450 1721 48 50 1.0 / 3.5 35
1721 55 55 5,5x55 350 1721 55 55 1.8 / 5.0 35
1721 55 60 5,5x60 300 1721 55 60 1.8 / 5.0 40
1721 55 85 5,5x85 150 1721 55 85 1.8 / 5.0 65
1721 55 109 5,5 x 109 150 1721 55 109 1.8 / 5.0 85
(d thread dia. x length mm)

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 111