Page 160 - Icon Ridge Sanitary-Heating-Air Catalog

Hand tools

Sheet Metal Punch Set for Sanitary Sector

Special selection for punching out the holes for stainless steel
sink units
• Makes fast, easy, clean and burr-free punching of thin-walled
materials possible
• Improved support due to 3 cutting tips thus minor deformation of the
material to be punched, no damage of the tension bolt
• Before applying the screw hole punch, it is essential to grease the
tension bolt with the drilliing and cutting oil (Art. No. 6580 5800)
• The metric tension bolts of the screw hole punches have the highest
quality class and are designed for extreme pressure - in case of loss
the commercially available metric fine thread screw can also be used

Guide values for the application of sheet metal punches:
Technical Data
Tension bolt Steel St. steel Non-ferrous and Plastics
mm sheets sheets light metals mm
mm mm mm
MF 8 x 1.0 2.0 1.0 4.0 4.0
MF 10 x 1.0 2.0 1.0 4.0 4.0
MF 12 x 1.5 3.0 2.0 4.0 4.0
MF 16 x 1.5 3.0 2.0 4.0 4.0

Article No. Article Description QTY
4944 100 SH.MET.PUNCH SET SANITARY 1
Included in delivery:
• Punch diameter 28.3 mm (PG21)
• Punch diameter 32.0 mm
• Punch diameter 35.0 mm
• Tension bolt MF 12 x 1.5 mm
• HSS tube and sheet drill 3-14 mm
• Plastic transport case

Sheet Metal Single-hole Punch
• Punch thin materials quickly and effortlessly, cleanly and free of burrs
• Improved seating due to 3-point cut means less deformation of the
punched parts, thus preventing damage to the draw bolt
• Before using the hole punch, it is essential to lubricate the draw bolt
with drilling and cutting oil (art.no. 6580 5800)
• The metric draw bolts of the hole punch are always of the highest
grade and are thus designed for extreme loads - if lost, they can also
be replaced for short-term use with commercial metric fine- thread
bolts
• Available in diameters of 18 mm, 20 mm, 22,5 mm, 24 mm, 26 mm,
32 mm, 35 mm, 40 mm, 50 mm
• MF 10 draw bolt for hole punches 18 mm, 20 mm, 22,5 mm, 24 mm,
26 mm
MF 12 draw bolt for punches 32 mm, 35 mm, 40 mm, 50 mm

Article No. Article Description QTY
4944 18 SHEET MET.SING.HOLE P.18MM 1
4944 19 SHEET MET.SING.HOLE P.19MM 1
4944 20 SHEET MET.SING.HOLE P.20MM 1
4944 225 SHEET MET.SING.HOLE P.22.5MM 1
4944 24 SHEET MET.SING.HOLE P.24MM 1
4944 26 SHEET MET.SING.HOLE P.26MM 1
4944 29 SHEET MET.SING.HOLE P.29MM 1
4944 32 SHEET MET.SING.HOLE P.32MM 1
4944 35 SHEET MET.SING.HOLE P.35MM 1
4944 40 SHEET MET.SING.HOLE P.40MM 1
4944 50 SHEET MET.SING.HOLE P.50MM 1

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 160