Page 54 - Icon Ridge Sanitary-Heating-Air Catalog

Building Services

Sliding Nut STRUT

For fixing in mounting rails and consoles
• Electrolytically galvanised
• Material thickness: 6 mm
• Compatible with all mounting rails Type 41 STRUT

Technical Data
Tightening Max. recommended
Torque in Nm¹ Tensile load in N
15 6,000
1) Tightening torque should not be exceeded

Article No. Article Description QTY
8578 8 SLIDING NUT STRUT M 8 f 100
8578 10 SLIDING NUT STRUT M10 f 100
8578 12 SLIDING NUT STRUT M12 f 100

Rail Insulation Profile STRUT

To prevent acoustic bridges during the construction of traverses
and consoles in ventilation systems
• Sound-deadening insert for mounting rails Type 41 STRUT
• Noise insulation according to DIN 4109
Product benefits:
• Quick assembly
• Made from high quality EPDM rubber
• Can also be used with M6, M8 and M10 threaded rods
Usage instructions:
• Press into the mounting rail profile
• Push over the threaded rod

Technical Data
For rails For threaded rods
STRUT Type 41 M6 / M8 / M10

Article No. Article Description QTY
8574 41 RO(30M)RAIIL INS.PROFILE STRUT e 30

Rail End Cap STRUT

For safe and neat finishing of the ends of mounting rails and
consoles
• Simply press or tap in
• Ribbed on the sides for better hold
Product benefits:
• Made from high quality polyethylene
• Suitable for mounting rails Type 41 × 21 and Type 41 × 41 STRUT

Article No. Article Description QTY
8574 1 41 21 RAIL END CAP STRUT 41/21 e 50
8574 1 41 41 RAIL END CAP STRUT 41/41 e 50

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 54